If you’re searching for information on “Program 2017 Subaru Key Fob,” you’ve come to the right place. Programming a new key fob for your 2017 Subaru might seem daunting, but it can be simpler than you think. This comprehensive guide will walk you through everything you need to know, from understanding the process to successfully programming your key fob at home.
Subaru Key Fob Programming
Understanding Key Fob Programming
Before we dive into the step-by-step guide, let’s understand what Key Fob Programming entails. Modern vehicles, like your 2017 Subaru, utilize transponder keys and remote keyless entry systems for security and convenience. Each key fob has a unique code that needs to be recognized by your car’s immobilizer system. Programming a key fob essentially means teaching your Subaru’s computer to recognize and accept the new fob’s signal.
Do You Need a Professional?
While some car models require professional programming, many 2017 Subarus allow you to program a new key fob yourself if you have two working keys already. This DIY approach can save you time and money. However, if you’re uncomfortable with the process or don’t have two working keys, a professional locksmith or dealership can assist you.
What You’ll Need
Before you begin the programming sequence, gather the following:
- Two working Subaru key fobs: You’ll need both existing, functioning fobs for this process.
- The new, unprogrammed key fob: This is the fob you want to program to your vehicle.
- Your Subaru owner’s manual: This will provide model-specific instructions and confirm if DIY programming is possible for your specific trim level.
Subaru Key Fob and Car
Programming Your 2017 Subaru Key Fob: Step-by-Step Guide
These instructions are generalized, and certain steps may differ slightly depending on your Subaru model. Always refer to your owner’s manual for the most accurate procedure.
-
Prepare your vehicle: Park your Subaru in a secure location, ensuring all doors are closed and unlocked.
-
Enter programming mode: Sit in the driver’s seat and close the door. Insert the first working key fob into the ignition. Turn the key to the “ON” position and back to the “OFF” position, repeating this cycle six times in rapid succession. (The “ON” position is the position just before the engine starts).
-
Confirm programming mode: Observe the hazard lights. They should flash several times, indicating the car has entered programming mode.
-
Program the first working key: Remove the first key and insert the second working key. Turn it to the “ON” position and back to the “OFF” position. You’ll typically have around 30 seconds to complete this step.
-
Program the new key fob: Quickly repeat step 4 with the new, unprogrammed key fob, turning it to the “ON” position and back to the “OFF” position within the 30-second window.
-
Exit programming mode: Insert the first working key fob again and turn it to the “ON” position and then back to “OFF”. The hazard lights should flash again, confirming successful programming.
-
Test all key fobs: Remove all keys from the ignition. Try locking and unlocking your car with each key fob to ensure they are all functioning correctly.
Common Issues and Troubleshooting
Problem: My hazard lights don’t flash after completing the initial cycles.
Solution: Ensure your doors are closed and unlocked, and that you are turning the key to the correct positions within the timeframe. Try repeating the cycles more smoothly and rapidly.
Problem: The new key fob doesn’t work after programming.
Solution: You might have missed a step or exceeded the timeframe. Refer to your owner’s manual and repeat the entire programming process from the beginning.
Subaru Key Replacement
Alternatives for Programming Your Subaru Key Fob
If you encounter difficulties programming the key fob yourself or lack two working keys, here are alternative options:
- Professional Automotive Locksmith: Locksmiths specializing in automotive services have the expertise and equipment to program Subaru key fobs. They can often create new keys even if you’ve lost all your originals.
- Subaru Dealership: Your local Subaru dealership can program new key fobs, but this option tends to be more expensive than using a locksmith.
Additional Tips and Considerations
-
Battery Check: Ensure your new key fob has a fresh battery before programming. A weak battery can interfere with the process.
-
Key Fob Types: Subaru offers different types of key fobs, such as those with [Subaru remote start using key fob] or [computerized car fob Subaru Outback 2017 key] functions. Make sure you purchase a compatible replacement fob for your specific model.
-
Lost Key Fob: If you need a replacement for a lost key, it’s best to have all remaining keys programmed together to ensure optimal security. For instance, if you have a [2004 Subaru Forester lost key fob], reprogramming the remaining keys with a new one is recommended.
-
Understanding Key Fob Variations: Be aware that key fobs can differ even within the same model year. For example, [Subaru 2012 Forester key fob types] vary, and choosing the correct replacement is crucial.
-
Don’t Delay: If you’re experiencing issues with your current key fob or have lost one, address it promptly. Driving with only one working key puts you at risk if that key fails or gets lost.
Conclusion
Programming your 2017 Subaru key fob doesn’t have to be a complicated ordeal. With the right information and a bit of patience, you can often handle this task yourself. However, if you’re ever unsure about the process, seeking assistance from a qualified professional is always recommended.
Need expert help programming your 2017 Subaru key fob? Contact Keyfobprog at +1 (641) 206-8880 or visit our office at 1326 N Houston St, Amarillo, TX 79107, USA. We specialize in [replacing a Subaru key fob] and programming for all Subaru models, ensuring you get back on the road quickly and safely.
Leave a Reply