Is your 2008 Honda Pilot key fob acting up? A common culprit is a dead or dying battery. Knowing the correct battery size is crucial for a quick and hassle-free replacement. This guide will tell you everything you need to know about the 2008 Honda Pilot Key Fob Battery Size, ensuring you get the right power source for your remote.
The key fob for the 2008 Honda Pilot uses a CR1616 battery. This is a common 3V lithium coin cell battery that provides reliable power for your keyless entry system. Using the correct CR1616 battery size is essential for ensuring optimal performance and longevity of your key fob. Don’t guess or use substitutes; sticking to the recommended battery guarantees proper function.
Replacing the battery in your 2008 Honda Pilot key fob is a straightforward process you can often do yourself, saving time and money compared to visiting a dealership. Here’s a simple step-by-step guide:
- Locate the notch: On the side of your key fob, you’ll find a small notch.
- Pry it open: Use a small flathead screwdriver or a coin to gently pry open the key fob casing at the notch.
- Access the battery: Once open, you’ll see the circuit board and the battery.
- Remove the old battery: Carefully remove the CR1616 battery. Note the orientation (+ side up) before removing it.
- Insert the new battery: Place the new CR1616 battery in the same orientation as the old one.
- Close the fob: Snap the key fob casing back together until it clicks securely.
Image showing the front of a 3-button key fob for Honda Pilot 2005-2008 models, highlighting the button layout.
Besides the battery size, here are some other important details about your 2008 Honda Pilot key fob:
- FCC ID: CWTWB1U545. This ID is crucial if you ever need to replace the entire key fob and need to ensure compatibility.
- Frequency: 433 MHz. This is the radio frequency used for communication between the fob and your vehicle.
- OE #: 35111-S9V-325. This is the original equipment part number.
- Chip ID: ID46 (Letter V). This refers to the transponder chip inside the fob.
Image displaying the back of the Honda Pilot key fob, illustrating the casing and battery compartment access.
While battery replacement is usually DIY-friendly, programming a new key fob to your 2008 Honda Pilot often requires professional equipment. If you are replacing the entire key fob, you will likely need to visit a qualified locksmith or dealership for programming. They have the tools and expertise to sync the new fob with your car’s immobilizer system.
In conclusion, for your 2008 Honda Pilot key fob, remember the battery size is CR1616. Keeping this information handy will make battery changes quick and ensure your key fob continues to work reliably. For key fob programming or more complex issues, always consult a professional locksmith for expert assistance.
