Is your 2020 Ford Edge key fob not working as reliably as it used to? You might be facing a common issue: a dead or dying key fob battery. Fortunately, replacing the battery in your Ford Edge key fob is a straightforward task you can easily do yourself. This guide, brought to you by the experts at keyfobprog.com, will walk you through the process step-by-step, ensuring you can get back to unlocking your vehicle with ease.
Identifying the Type of Key Fob
Ford Edge models in 2020 can come with two main types of key fobs: the Integrated Keyhead Transmitter (IKT) and the Intelligent Access key (IA key). While both serve the same purpose, their battery replacement procedures are slightly different. Let’s identify which type you have and then dive into the specific instructions.
Tools You’ll Need
Before you begin, gather these simple tools:
- A small flat-head screwdriver or a thin coin (like a dime or nickel).
- A new CR2032 battery. This is the standard battery for most Ford key fobs and readily available at most drugstores, supermarkets, and online retailers.
Step-by-Step Guide to Replacing Your 2020 Ford Edge Key Fob Battery
No matter if you have the IKT or IA key, the process is designed to be user-friendly. Here’s how to replace the battery in each type:
For the Integrated Keyhead Transmitter (IKT):
-
Locate the Slot: On the back of your IKT key fob, near the key ring, you’ll find a small slot.
-
Open the Casing: Insert the flat-head screwdriver or coin into this slot. Gently twist the tool. This action will pop open the battery cover. You might hear a click, and the cover should become loose.
-
Remove the Battery Cover: Carefully remove the battery cover to expose the battery compartment.
-
Access the Battery: If the rubber gasket comes off with the cover, set it aside. You’ll now see the old battery.
-
Remove the Old Battery: Gently pry out the old battery. Note the orientation of the battery (+ side up or down) before removing it. This is crucial for inserting the new battery correctly.
-
Insert the New Battery: Take your new CR2032 battery and insert it into the compartment, matching the correct orientation you noted earlier. Press down on the battery to ensure it is securely seated.
-
Replace the Gasket (if removed): If the rubber gasket came off, carefully place it back onto the transmitter, ensuring it’s properly aligned.
-
Close the Casing: Snap the battery cover back onto the key fob until it clicks securely into place.
For the Intelligent Access Key (IA Key):
-
Remove the Backup Key: Locate the small release button or latch on your IA key fob. Press it to release and slide out the mechanical backup key.
-
Find the Hidden Slot: Once the backup key is removed, you’ll see a slot where the key was housed. This is the slot you’ll use to open the battery compartment.
-
Open the Casing: Insert your flat-head screwdriver or coin into this hidden slot. Gently twist to separate the key fob halves and remove the battery cover.
-
Remove the Old Battery: Carefully remove the old battery, again noting its orientation for correct replacement.
-
Insert the New Battery: Insert the new CR2032 battery, ensuring it matches the correct orientation. Press it down to secure it in place.
-
Close the Casing: Snap the battery cover back onto the key fob until it’s firmly closed.
-
Reinstall the Backup Key: Slide the mechanical backup key back into its slot until it clicks into place.
Important Notes:
- Grease on Terminals: You might notice some grease on the battery terminals or circuit board. Do not wipe this off. It’s there to ensure good electrical contact.
- Battery Disposal: Dispose of the old battery according to your local regulations for battery disposal.
- No Reprogramming Needed: Replacing the battery will not cause your 2020 Ford Edge key fob to lose its programming. It should work immediately after battery replacement.
Troubleshooting
If your key fob still doesn’t work after replacing the battery, double-check:
- Battery Orientation: Ensure the battery is inserted with the correct polarity (+ and – sides).
- Battery Type: Confirm you are using a CR2032 battery.
- Secure Connection: Make sure the battery is firmly seated and the battery cover is completely closed.
If issues persist, there might be a different problem with your key fob, and it’s best to consult a professional or your Ford dealership.
Conclusion
Replacing the battery in your 2020 Ford Edge key fob is a simple DIY maintenance task that can save you time and money. By following these easy steps, you can quickly restore the functionality of your key fob and get back on the road with confidence. Keep a spare CR2032 battery handy so you’re always prepared!
