Lost your key fob or need to program a new one for your 2007 Chevy Impala? Don’t worry, programming a key fob for your 2007 Chevrolet Impala can often be done right at home without a trip to the dealership. This guide provides simple, step-by-step instructions to program your 2007 Chevy Impala key fob, saving you time and money. Depending on whether your Impala is equipped with Driver Information Center (DIC) buttons, the procedure varies slightly. Follow the instructions below that match your vehicle’s configuration.
Programming for 2007 Chevy Impala with Driver Information Center (DIC) Buttons
If your 2007 Chevy Impala has Driver Information Center buttons, typically located on the steering wheel or dashboard, use this procedure:
-
Turn the Ignition to ON: Insert your Chevy Impala key into the ignition and turn it to the “ON” position. This is the position right before you would start the engine. Ensure you can access the Driver Information Center display.
-
Access Remote Key Relearn Menu: Press the “vehicle information” button on your DIC controls. Cycle through the options until you see PRESS TO RELEARN REMOTE KEY displayed on the Driver Information Center screen.
-
Initiate Learning Mode: Once PRESS TO RELEARN REMOTE KEY is displayed, press the “set/reset” button. The Driver Information Center will then show REMOTE KEY LEARNING ACTIVE, indicating that your 2007 Chevy Impala is now in key fob programming mode.
-
Program the First Key Fob: Take your first key fob that you want to program. Simultaneously press and hold both the “lock” and “unlock” buttons on the key fob for approximately 15 seconds. Listen for a chime sound from your Impala. This chime indicates that the key fob has been successfully programmed to your vehicle.
-
Program Additional Key Fobs (Optional): If you have additional key fobs to program, repeat step 4 immediately. Your 2007 Chevy Impala can be programmed to recognize up to eight key fobs.
-
Exit Programming Mode: After you have programmed all desired key fobs, turn the ignition key to the “OFF” position and remove the key from the ignition.
-
Test the Key Fobs: Thoroughly test all programmed key fobs to ensure they are working correctly by locking and unlocking the doors, and activating any other remote functions.
Programming for 2007 Chevy Impala without Driver Information Center (DIC) Buttons
If your 2007 Chevy Impala does not have Driver Information Center buttons, you’ll use the trip odometer reset stem to navigate the programming process.
-
Prepare the Vehicle: Ensure your 2007 Chevy Impala is in “Park” (P). Insert the key into the ignition and turn it to the “ON” position (as far as you can go without starting the engine).
-
Access Relearn Remote Key Display: Locate the trip odometer reset stem on your instrument cluster. Press and release the trip odometer reset stem repeatedly until RELEARN REMOTE KEY is displayed in the instrument panel.
-
Activate Learning Mode: Once RELEARN REMOTE KEY is displayed, press and hold the trip odometer reset stem for approximately three seconds. The display will change to REMOTE KEY LEARNING ACTIVE, confirming that your Impala is ready to program key fobs.
-
Program the First Key Fob: Take the first key fob to be programmed. Press and hold the “lock” and “unlock” buttons on the key fob simultaneously for about 15 seconds. A chime will sound, signaling successful programming of the remote.
-
Program Additional Key Fobs (Optional): If you have more key fobs to program, immediately repeat step 4 for each additional fob. You can program up to eight remotes for your 2007 Chevy Impala.
-
Exit Programming Mode and Test: Turn the ignition key to the “OFF” position and remove the key. Test each programmed key fob to verify it is working as expected.
By following these straightforward steps, you can easily program your 2007 Chevy Impala key fob yourself. This do-it-yourself approach can save you a significant amount compared to dealership programming costs. Always ensure you are using a compatible key fob for your 2007 Chevrolet Impala. If you encounter any issues during the programming process, or if you prefer professional assistance, consult a certified automotive locksmith or your local Chevrolet dealer.
