Is your 2017 Hyundai Tucson key fob starting to feel a bit unresponsive? Perhaps you need to press the buttons multiple times to lock or unlock your doors, or maybe the range has significantly decreased. The most common culprit for these issues is a low or dead battery for your 2017 Hyundai Tucson key fob. Fortunately, replacing the battery is a straightforward and cost-effective fix that can save you a trip to the dealership and keep your key fob working like new.
This guide, brought to you by the experts at keyfobprog.com, your trusted source for automotive key solutions, will walk you through everything you need to know about your 2017 Hyundai Tucson key fob battery. We’ll cover the correct battery type, how to replace it, and other important information to keep your keyless entry system functioning perfectly.
Identifying the Right Battery for Your 2017 Hyundai Tucson Key Fob
The battery used in your 2017 Hyundai Tucson key fob is a CR2032 3V lithium coin cell battery. This is a widely available and inexpensive battery type that you can find at most drugstores, supermarkets, electronics stores, and online retailers.
Alt text: Front and back view of a genuine 2017 Hyundai Tucson key fob, highlighting its four buttons: lock, unlock, power door release, and panic alarm.
To be absolutely sure you’re getting the right battery, you can always double-check your owner’s manual. Alternatively, you can open your key fob (we’ll explain how shortly) and visually confirm the battery type printed directly on the old battery. Using the correct CR2032 battery ensures optimal performance and longevity for your 2017 Hyundai Tucson key fob.
Knowing the Hyundai part number for your complete key fob can also be helpful if you ever need a full replacement. For the 2017 Hyundai Tucson key fob, the part number is 95430-D3010. You might also see the FCC ID TQ8-RKE-4F25 and IC 5074A-RKE4F25 printed on the back of your remote. These identifiers are useful for verifying compatibility and ensuring you have the correct key fob model for your vehicle.
Step-by-Step Guide to Replacing Your 2017 Hyundai Tucson Key Fob Battery
Replacing the battery in your 2017 Hyundai Tucson key fob is a simple DIY task that you can usually accomplish in under 5 minutes with just a few common tools. Here’s a general guide:
- Gather your tools and new battery: You will need a small flathead screwdriver or a similar tool to gently pry open the key fob casing. And of course, your new CR2032 battery.
- Locate the notch or seam on your key fob: Examine your key fob closely. You should find a small notch or seam where the two halves of the casing meet.
- Carefully pry open the casing: Insert the flathead screwdriver into the notch and gently twist to separate the two halves of the key fob casing. Be careful not to use excessive force, as you could damage the plastic.
- Remove the old battery: Once the casing is open, you’ll see the battery. Note the orientation of the battery (usually positive side up). You can use your fingertip or the tip of the screwdriver to gently pry out the old battery.
- Insert the new battery: Place the new CR2032 battery into the compartment, ensuring it’s in the correct orientation (positive side usually facing up, matching the orientation of the old battery).
- Reassemble the key fob: Carefully snap the two halves of the key fob casing back together until they are securely closed.
Alt text: Illustration showing the process of replacing a key fob battery, emphasizing the use of a small screwdriver to open the casing and the correct orientation of the new CR2032 battery.
After replacing the battery, test your 2017 Hyundai Tucson key fob to ensure it’s working properly. You should notice an immediate improvement in range and responsiveness.
Key Fob Programming and Other Considerations
For the 2017 Hyundai Tucson key fob described here (part number 95430-D3010), it’s important to note that while replacing the battery will not require reprogramming, the key fob itself needs to be professionally programmed to your vehicle when initially installed. This programming process usually needs to be done by a Hyundai dealership or a qualified automotive locksmith.
This particular key fob is designed for vehicles with a turn-the-key ignition and standard keyless entry system, specifically for the USA market. If your Hyundai Tucson was originally manufactured for the Canadian market, it might have different keyless entry system requirements. If you are unsure about compatibility, it’s always best to consult with your Hyundai dealer or a locksmith before purchasing a replacement key fob.
Get Back to Keyless Convenience
Replacing the battery for your 2017 Hyundai Tucson key fob is a simple and effective way to restore the convenience of your keyless entry system. By using the correct CR2032 battery and following these steps, you can avoid unnecessary dealership visits and keep your key fob functioning reliably for years to come.
For all your Hyundai key fob needs, including replacement remotes and further assistance, remember to visit keyfobprog.com – your trusted partner in automotive key solutions.
