Is your 2019 Ford Edge key fob not working as reliably as it used to? Before assuming there’s a major issue, the most common culprit is often a low battery. Replacing the battery in your 2019 Ford Edge key fob is a simple task you can easily do yourself, saving you time and a trip to the dealership. This guide will walk you through the process step-by-step.
What Battery Does a 2019 Ford Edge Key Fob Need?
The 2019 Ford Edge key fob uses a CR2032 battery. This is a widely available and inexpensive 3V lithium coin cell battery. You can find CR2032 batteries at most drugstores, grocery stores, and electronics retailers. Keeping a spare CR2032 battery on hand is always a good idea to avoid being caught off guard by a dead key fob battery.
Step-by-Step Guide to Replacing Your Key Fob Battery
Replacing the battery in your 2019 Ford Edge key fob is straightforward and requires no special tools. Here’s how to do it:
-
Locate the small notch: On the side of your Ford Edge key fob, you’ll find a small notch. This notch is designed to help you open the key fob casing.
-
Use your key blade or a small screwdriver: Insert the key blade from your key fob or a small flathead screwdriver into the notch. Gently twist to pry the two halves of the key fob apart. Be careful not to apply excessive force, as you could damage the casing.
-
Open the key fob: Once you’ve gently pried it open, the key fob will separate into two pieces.
-
Remove the old battery: Carefully remove the old CR2032 battery. You might be able to use your finger or the small screwdriver to gently lift it out of its compartment. Take note of the battery’s orientation (+ side up) before removing it.
-
Insert the new battery: Place the new CR2032 battery into the compartment, ensuring the + side is facing upwards, matching the orientation of the old battery.
-
Reassemble the key fob: Carefully snap the two halves of the key fob casing back together. You should hear a click, indicating that it’s securely closed.
-
Test your key fob: Press the buttons on your key fob to ensure it’s working correctly. The door locks should activate, and the remote start should function if your vehicle is equipped with it.
Tips for Key Fob Battery Replacement
- Work on a clean surface: This will prevent losing any small parts of the key fob.
- Gentle is key: Avoid using excessive force when opening the key fob to prevent damage.
- Battery orientation: Make sure to insert the new battery in the correct orientation.
- Dispose of old batteries properly: Lithium batteries should be recycled properly. Check your local regulations for battery disposal.
By following these simple steps, you can easily replace the battery in your 2019 Ford Edge key fob and restore its functionality. This simple maintenance can keep your key fob working reliably and save you unnecessary expenses.
