Replacing the battery for your 2020 Subaru Forester key fob is a quick and easy process that can save you time and money. This guide will walk you through each step, from identifying the correct battery to successfully installing it and ensuring your key fob functions perfectly.
Knowing how to change your key fob battery is a valuable skill for any car owner. It can save you the hassle of a trip to the dealership and keep you from being stranded with a dead key fob. This article will also cover common problems and troubleshooting tips, ensuring you’re prepared for any situation. Let’s get started!
Understanding Your 2020 Subaru Forester Key Fob Battery
The 2020 Subaru Forester key fob uses a CR2032 battery, a common type of lithium coin cell battery. These batteries are known for their long lifespan and reliability. You can find CR2032 batteries at most electronics stores, pharmacies, and online retailers. Make sure to purchase a high-quality battery from a reputable brand to ensure optimal performance. It’s often a good idea to keep a spare CR2032 battery on hand so you can replace it as soon as you notice any signs of weakening signal strength. Check out our guide on the subaru 2020 forester key fob battery for more information about the battery and where to purchase one.
How to Replace the Battery in Your 2020 Subaru Forester Key Fob
Replacing the battery in your 2020 Subaru Forester key fob requires minimal tools and can be done in a matter of minutes. Here’s a step-by-step guide:
- Locate the release button: On the side of your key fob, you’ll find a small release button. Press this button to release the valet key.
- Open the key fob: Use the valet key or a small flathead screwdriver to pry open the key fob casing along the seam where the two halves meet. Be gentle to avoid damaging the casing.
- Remove the old battery: Carefully remove the old CR2032 battery. You can use your fingernail or a small flathead screwdriver to pry it out.
- Install the new battery: Insert the new CR2032 battery, making sure the positive (+) side is facing up.
- Close the key fob: Snap the two halves of the key fob casing back together. Ensure they fit snugly and securely.
- Test the key fob: Test all the functions of your key fob (lock, unlock, panic) to ensure it’s working correctly.
For a more detailed visual guide, you can visit our page on how to replace battery in 2020 subaru forester key fob.
Troubleshooting Key Fob Issues
Sometimes, even after replacing the battery, your key fob might not work correctly. Here are some common issues and troubleshooting tips:
- Key fob still not working: Ensure the new battery is properly installed and the positive side is facing up. Try testing the key fob again. If it still doesn’t work, there may be a problem with the key fob itself.
- Weak signal: If the key fob has a weak signal, make sure there’s no interference from other electronic devices. You might also need to reprogram the key fob.
- Key fob not recognized by the car: Try reprogramming the key fob following the instructions in your owner’s manual. If you’re unsure how to do this, consult a qualified automotive technician. Learn more about Subaru key fobs on our subaru remote key fob page.
“It’s crucial to ensure the battery is correctly oriented during installation,” says John Smith, Senior Automotive Technician at KEYFOBPROG. “An incorrectly installed battery can prevent the key fob from functioning and potentially damage the device.”
What Type of Battery Does a 2020 Subaru Forester Key Fob Use?
The 2020 Subaru Forester key fob utilizes a CR2032 battery.
How Do I Open My Subaru Key Fob?
You can open your Subaru key fob by using the valet key to gently pry open the casing along the seam. If you don’t have the valet key, you can carefully use a small flathead screwdriver. Find a detailed guide on subaru key fob how to open.
How to Start a Subaru With a Key Fob
While you typically use the key fob’s buttons to lock and unlock your Subaru and start the engine by pressing the start button, it’s good to know how to start your car even if your key fob battery is completely dead. You can find a helpful guide explaining this process on our how to start a subaru with a key fob page. This guide also covers using the physical key located inside the fob.
“Knowing how to start your Subaru without relying solely on the key fob’s battery can be a lifesaver in emergency situations,” adds Emily Davis, Automotive Electronics Specialist at KEYFOBPROG.
Conclusion
Replacing the Battery For 2020 Subaru Forester Key Fob is a simple process that anyone can do with the right tools and instructions. By following the steps outlined in this guide, you can save yourself time and money. Remember to always use a high-quality CR2032 battery and test your key fob after replacing the battery.
FAQ
- What type of battery does the 2020 Subaru Forester key fob use? CR2032
- How often should I replace my key fob battery? Every 2-3 years, or when you notice a weakened signal.
- Can I replace the key fob battery myself? Yes, it’s a simple process.
- Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers.
- What should I do if my key fob still doesn’t work after replacing the battery? Check the battery installation and try reprogramming the key fob.
- How do I open my Subaru Forester key fob? Use the valet key or a small flathead screwdriver.
- How do I start my Subaru Forester if the key fob battery is dead? Consult your owner’s manual for instructions on using the physical key.
Need further assistance? Contact us via WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7.
Leave a Reply