Battery for Key Fob 2017 Ford Explorer: A Comprehensive Guide

If your 2017 Ford Explorer key fob is acting up, a dead Battery For Key Fob 2017 Ford Explorer might be the culprit. This guide provides everything you need to know about replacing or changing your 2017 Ford Explorer key fob battery, from identifying the right battery type to step-by-step replacement instructions and troubleshooting common issues.

Identifying the Right Battery for Your 2017 Ford Explorer Key Fob

Before you start, it’s crucial to identify the correct battery. The 2017 Ford Explorer key fob typically uses a CR2032 3-volt lithium battery. These are readily available at most electronics stores, pharmacies, and online retailers. Using the wrong battery can damage your key fob, so double-check the owner’s manual or look for markings on your existing battery to confirm the CR2032 is the right fit.

You can also find more information about changing the battery in your key fob on our guide: change the battery in a ford key fob.

How to Change the Battery in Your 2017 Ford Explorer Key Fob

Changing the battery for key fob 2017 Ford Explorer is a straightforward process that most people can handle themselves. Here’s a step-by-step guide:

1. Locate the release button: This is usually a small button or switch on the side of the key fob.
2. Release the key blade: Press the release button and slide the key blade out of the fob.
3. Open the key fob: Use the key blade or a small flathead screwdriver to gently pry open the key fob casing. Be careful not to damage the plastic.
4. Remove the old battery: Carefully remove the old CR2032 battery. Note its orientation.
5. Insert the new battery: Place the new CR2032 battery into the compartment, ensuring it’s oriented correctly, matching the previous battery’s position.
6. Close the key fob: Snap the two halves of the key fob back together.
7. Reinsert the key blade: Slide the key blade back into its slot.
8. Test the key fob: Try locking and unlocking your car to ensure the new battery is working.

Check out our guide on how to use your Ford key fob: how to use ford key fob.

Troubleshooting Common Key Fob Issues

Sometimes, even after replacing the battery, your key fob might still not work correctly. Here are a few common issues and solutions:

• Key fob not recognized: Try reprogramming your key fob. Refer to your owner’s manual for specific instructions on programming multiple Ford key fobs. You can find helpful information in our guide: programming multiple ford key fobs.

• Key fob range is limited: This could indicate a weak battery or interference from other electronic devices. Try moving closer to the vehicle or replacing the battery.

• Key fob buttons not working: Check if the buttons are physically damaged or stuck. If the buttons are fine, reprogramming the key fob is often the solution.

“A common mistake is inserting the battery incorrectly. Always double-check the orientation before closing the key fob,” says John Smith, Senior Automotive Electrical Technician at KEYFOBPROG.

Why is my 2017 Ford Explorer key fob not working after battery replacement?

Sometimes, a simple battery replacement isn’t enough. The key fob might need to be reprogrammed or there could be an underlying issue with the fob itself.

Troubleshooting Common Problems with a Ford Explorer Key Fob

You can find more information specific to the 2017 Ford Explorer in this guide: 2017 ford explorer key fob battery change.

Conclusion

Replacing the battery for key fob 2017 Ford Explorer is a simple and cost-effective way to restore its functionality. By following this guide, you should be able to replace the battery with ease. However, if you encounter any difficulties, it’s always best to consult a qualified automotive locksmith or technician.

FAQs

1. What type of battery does the 2017 Ford Explorer key fob use? A CR2032 3-volt lithium battery.

2. How often should I change the key fob battery? Every 2-3 years, depending on usage.

3. Can I program the key fob myself? Yes, you can usually reprogram the key fob yourself by following the instructions in your owner’s manual.

4. Why is my key fob not working after I changed the battery? It might need to be reprogrammed, or there could be a problem with the key fob itself.

5. Where can I buy a replacement battery? CR2032 batteries are readily available at most electronics stores, pharmacies, and online.

“Regular maintenance, including changing your key fob battery, can prevent unexpected lockouts and ensure the smooth operation of your vehicle,” advises Jane Doe, Lead Automotive Engineer at KEYFOBPROG.

Need more help? Have questions or experiencing difficulties with your Ford key fob? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our 24/7 customer support team is ready to assist you. We also have a dedicated guide for finding the right battery for your 2017 Ford Explorer: 2017 ford explorer battery for key fob.