If you own a classic 1995 Chevy Suburban, the convenience of a key fob is something you likely appreciate. These remote keyless entry systems were a fantastic feature for their time, adding a layer of ease to your daily driving. However, like any electronic component, key fobs can need replacement or reprogramming. Whether you’ve lost your original fob, the battery died, or you’ve purchased a replacement, understanding how to program your 1995 Chevy Suburban Key Fob is essential.
This guide provides a step-by-step walkthrough to program your 1995 Chevy Suburban key fob, ensuring you can regain the convenience of remote locking and unlocking. We’ll cover the specific procedure for your vehicle and offer helpful information to make the process as smooth as possible.
Understanding Your 1995 Chevy Suburban Key Fob System
The key fob for your 1995 Chevy Suburban, while seemingly simple, is part of a sophisticated remote keyless entry system. General Motors (GM) manufactured these remotes for a variety of their vehicles, including Chevrolet, GMC, Cadillac, and Oldsmobile. Interestingly, the same remote could be branded with different logos and assigned various part numbers. Initially, GM produced remotes with brand-specific logos, each with its own part number, but these were all interchangeable. GM later streamlined this by discontinuing the logo versions and replacing them with a universal, non-logo remote that served as a replacement for all of them.
You might find various part numbers associated with your 1995 Chevy Suburban key fob, including older, superseded numbers. Some of these include: 15692636, 15955515, 15955516, 25609144, 25555951, 15692336, 10239647, 25559364, 25609144, 15657587, 15955702, and 15731442. The most current GM part number is 15725423. Regardless of the specific part number etched on your original or replacement fob, they likely operate under the FCC IDs ABO0103T or ABO0104T. The important takeaway is that these remotes are designed to be onboard programmable, meaning you can program them yourself without needing specialized tools or a trip to the dealership.
Step-by-Step Programming Guide for Your 1995 Chevy Suburban Key Fob
Before you begin the programming procedure, ensure you have all the key fobs you intend to use with your 1995 Chevy Suburban. Programming a new fob will erase all previously programmed codes from the system’s memory. Therefore, you’ll need to reprogram all your fobs at the same time to ensure they all function correctly.
Here’s how to program your 1995-1996 Chevrolet Suburban key fob:
-
Prepare Your Vehicle: Insert the ignition key into the ignition switch, but leave it in the “OFF” position. Do not start the engine.
-
Locate the Data Link Connector (DLC): The Data Link Connector, or DLC, is typically located underneath the driver’s side dashboard. You’ll need to access this connector to initiate the programming sequence. It’s a multi-pin connector used for diagnostics and, in this case, key fob programming.
-
Identify Terminals 4 and 8 on the DLC: Carefully examine your DLC. It usually has two rows of pins and may be tapered at the ends. You’ll be working with the wider row of cavities, which are often (though not always) numbered 1 through 8. Refer to the diagram below to help identify terminals 4 and 8. Ensure that there are metal contact pins present in both terminal 4 and terminal 8.
(Note: Ideally, a diagram of the DLC connector would be inserted here, showing the pin layout and numbering. Since a direct image URL isn’t provided, imagine a diagram is shown here for visual clarity.)
-
Bridge Terminals 4 and 8: Use a suitable jumper wire to connect terminal 8 to terminal 4 of the DLC. It’s crucial to correctly identify these terminals. Keep the jumper wire connected throughout the entire programming procedure. When you successfully bridge terminals 4 and 8, your 1995 Chevy Suburban should respond by cycling the door locks – they will lock and then unlock. This lock cycling indicates that you have successfully entered the key fob programming mode.
-
Program the First Key Fob: Take your first key fob that you want to program. Press and hold down both the “LOCK” and “UNLOCK” buttons simultaneously. Continue holding both buttons for approximately 30 seconds. After about 30 seconds, the vehicle should respond again by cycling the door locks (locking and unlocking). Once you see the locks cycle, release both buttons on the key fob. This confirms that the first key fob has been successfully programmed.
-
Program Additional Key Fobs (Within One Minute): If you have additional key fobs to program, you must program them within one minute of programming the first one. Repeat step 5 for each additional key fob you want to program. Remember to do this within one minute of the previous fob programming to ensure they are all recognized by the system.
-
Exit Programming Mode: Once you have programmed all desired key fobs, remove the jumper wire from the DLC. Disconnect terminals 8 and 4. This action exits the programming mode.
-
Test Your Key Fobs: Thoroughly test each of your newly programmed key fobs to ensure they are functioning correctly. Press the “LOCK” and “UNLOCK” buttons on each fob to verify that they remotely control the door locks of your 1995 Chevy Suburban.
Vehicles Compatible with This Key Fob
This specific key fob and programming procedure are applicable to a range of GM vehicles equipped with the factory keyless entry system around the mid-1990s. Besides the 1995-1996 Chevrolet Suburban, this remote is compatible with the following vehicles:
- Cadillac DeVille (1991-1993)
- Cadillac Fleetwood (1992)
- Chevrolet Astro (1995-1996)
- Chevrolet Blazer (1993-1996)
- Chevrolet C/K 1500 & 2500 Suburban (1995-1996)
- Chevrolet Camaro (1994-1995)
- Chevrolet Caprice (1994-1996)
- Chevrolet Tahoe (1995-1996)
- GMC C/K 1500 & 2500 Suburban (1995-1996)
- GMC Jimmy (1995-1996)
- GMC Safari (1995-1996)
- GMC Yukon (1995-1996)
- Oldsmobile Bravada (1991-1996)
If you own one of these vehicles and need to program or replace your key fob, this guide and compatible remote information will be valuable resources.
Conclusion
Programming your 1995 Chevy Suburban key fob is a straightforward process you can accomplish at home with just a simple jumper wire. By following these steps carefully, you can quickly regain the convenience of remote keyless entry for your classic SUV. Remember to have all your fobs ready before you begin, and always double-check the compatibility and procedures for your specific vehicle year and model. Enjoy the renewed ease of your key fob system!
