Lost your 2000 Toyota Camry key fob or need to program a new one? Don’t worry, programming your key fob at home is easier than you might think and can save you a trip to the dealership. This guide provides clear, step-by-step instructions to get your 2000 Camry Key Fob programmed quickly and efficiently. No need to struggle with complicated manuals – just follow these simple steps and you’ll be locking and unlocking your Camry remotely in no time.
Here’s how to program your 2000 Camry key fob:
-
Prepare Your Camry: Begin by opening only the driver’s side door and ensure it remains unlocked. Close and lock all other doors of your 2000 Toyota Camry. This is crucial for initiating the programming sequence.
-
Ignition Key Cycle: Insert your key into the ignition cylinder, and then immediately remove it. It’s important not to turn the key at any point during this insertion and removal process. This step prepares the car to enter programming mode.
-
First Lock/Unlock Cycle (Five Times): Locate the power lock switch on your driver’s side door panel. Press the “Lock” button, then the “Unlock” button. Repeat this sequence five times at a consistent, even pace. This rapid cycling is key to getting the system ready.
-
Second Lock/Unlock Cycle and Ignition Sequence: Again, use the power lock switch and perform another five “Lock” then “Unlock” cycles. Immediately following this, insert your key back into the ignition cylinder. Now, turn the ignition to the “On” position, then “Off,” then “On” again, and finally “Off.” Remove the key from the ignition.
-
Wait for Auto Lock Cycle: At this point, you should hear the vehicle’s door locks cycle automatically. This is your signal that the system has successfully entered the keyless entry remote programming mode. Listen carefully for this confirmation.
-
Program the Key Fob: Take your keyless entry remote. Press and hold both the “Lock” and “Unlock” buttons simultaneously for about one second. Release both buttons, and then immediately press and hold only the “Lock” button for two seconds.
-
Confirmation and Completion: Watch for the vehicle’s locks to cycle once more. This confirms that your 2000 Camry key fob has been successfully programmed. To finalize the process, simply close the driver’s side door.
By following these steps carefully, you should be able to program your 2000 Camry key fob without any special tools or professional help. Enjoy the convenience of keyless entry once again!
Read more: http://www.ehow.com/how_7266682_program-remote-2000-camry.html
