Lost your 2000 Crv Key Fob or need to program a replacement? Programming your key fob for a 2000 Honda CRV can be done easily at home without any special tools. This guide provides simple, step-by-step instructions to get your 2000 CRV key fob working in minutes. Remember that this process will erase all previously programmed remotes, so you will need to reprogram all of your key fobs at the same time. Ensure you complete each step within 5 seconds of the last to stay in programming mode.
Here’s how to program your 2000 CRV key fob:
-
Turn Ignition to ON (II): Insert your key into the ignition and turn it to the ON position (II). This is the position right before you would start the engine.
-
Press LOCK or UNLOCK: Press the LOCK or UNLOCK button on one of your 2000 CRV key fobs. It doesn’t matter if the remote is already programmed for this step.
-
Turn Ignition to LOCK (0): Turn the ignition switch back to the LOCK (0) position. This is the position where you can remove your key.
-
Repeat Steps 1-3 (x2): Repeat steps 1, 2, and 3 two more times. Use the same key fob remote you used in step 2 for these repetitions.
-
Turn Ignition to ON (II) Again: Turn the ignition switch to the ON (II) position one last time.
-
Press LOCK or UNLOCK (Same Remote): Press the LOCK or UNLOCK button on the same key fob used in steps 2 and 4. If you’ve successfully entered programming mode, the power door locks should cycle (lock then unlock).
-
Program Each Remote: For each 2000 CRV key fob you wish to program, press the LOCK or UNLOCK button. After pressing a button on each remote, the door locks should cycle to confirm it has been programmed.
-
Turn Ignition to LOCK (0): Turn the ignition switch to the LOCK (0) position to exit the programming mode.
-
Test Remotes: Test each of your programmed 2000 CRV key fobs to ensure they are working correctly.
If you need a replacement 2000 CRV key fob, or an additional remote, visit Keylessentryremotefob.com for a wide selection and easy ordering. You can find the specific part you need by searching for part number A269ZUA101.
By following these instructions, you can easily program your 2000 CRV key fob and regain the convenience of keyless entry.
