2000 Honda Civic EX Key Fob Programming Instructions

Is your 2000 Honda Civic Ex Key Fob not working? Or perhaps you’ve just replaced the battery and need to resync it with your vehicle? Luckily, programming your key fob for your 2000 Honda Civic EX can be done right at home with a simple procedure. This guide will walk you through the steps to program your 2000 Honda Civic EX key fob quickly and easily.

Before you begin, it’s important to understand that initiating the programming sequence will erase all previously programmed remotes. Therefore, you will need to reprogram all the key fobs you intend to use with your 2000 Honda Civic EX during this session. Make sure you have all your remotes ready before starting. Also, ensure all doors are unlocked before you commence the programming.

Here are the step-by-step instructions to program your 2000 Honda Civic EX key fob:

1. Turn the ignition key to the ON position (position II). Do not start the engine.
2. Press the LOCK or UNLOCK button on your key fob remote.
3. Turn the ignition key to the ACCESSORY (position I) or LOCK (position 0).
4. Turn the ignition key back to the ON position (position II).
5. Press the LOCK or UNLOCK button again on the same key fob remote.
6. Turn the ignition key to the ACCESSORY (position I) or LOCK (position 0).
7. Turn the ignition key to the ON position (position II).
8. Press the LOCK or UNLOCK button a third time on the same key fob remote.
9. Turn the ignition key to the ACCESSORY (position I) or LOCK (position 0).
10. Turn the ignition key to the ON position (position II).
11. Press the LOCK or UNLOCK button a fourth time on the same key fob remote.
12. At this point, the door locks should cycle (lock and unlock) automatically. This indicates that your 2000 Honda Civic EX has successfully entered programming mode. If the locks do not cycle, repeat steps 1-12, ensuring each step is performed within 5 seconds of the previous one.
13. Immediately after the door locks cycle, press the LOCK button on each key fob you wish to program. For each key fob programmed, the door locks should cycle again to confirm successful programming. You can program up to three key fobs. Remember to program all your remotes at this stage.
14. Turn the ignition key to the LOCK position (position 0) to exit the key fob programming mode.
15. Test each programmed key fob to ensure they are working correctly by pressing the LOCK and UNLOCK buttons.

If you encounter any difficulties programming your 2000 Honda Civic EX key fob, or if you need to purchase a replacement key fob, visit Keylessentryremotefob.com for a wide selection of key fobs and professional assistance. You can also search for a local professional installer on our website by entering your city or zip code for help with key fob programming and other automotive services.