The 2000 Lincoln LS is equipped with a convenient keyless entry system, enhancing vehicle access and security. While often referred to as “key fob programming,” understanding how to manage your Lincoln LS’s entry codes is crucial. This guide will walk you through programming your personal entry code using the keypad on your 2000 Lincoln LS, ensuring you have personalized access to your vehicle.
Programming a Personal Entry Code
Setting up your own personal entry code on your 2000 Lincoln LS is a straightforward process. Follow these steps to customize your vehicle’s access:
-
Begin by entering the factory-set 5-digit code. This code is typically found in your owner’s manual or on a card provided with your vehicle. Entering this code correctly is the first step to initiating the programming sequence.
-
Within five seconds of successfully entering the factory code, press the 1 • 2 button on the keypad. This action signals to the system that you intend to program a personal entry code.
-
Next, enter your desired personal 5-digit code. Choose a code that is memorable to you but not easily guessable by others. Enter each digit within five seconds of the previous one to maintain the programming sequence.
-
After entering your 5-digit personal code, you have the option to link it to a specific personality feature. Enter a sixth digit to select the desired personality recall:
- Press 1 • 2 to link your personal code to driver personality 1. This will recall settings associated with driver 1 when the code is used.
- Press 3 • 4 to link your personal code to driver personality 2. This will recall settings associated with driver 2.
- Press 9 • 0 if you do not want to link your personal code to any driver personality. The code will simply unlock the vehicle without recalling specific settings.
After entering the sixth digit, the door lock motors will cycle, locking and then unlocking, confirming that your personal code has been stored.
-
To finalize and save your new personal entry code, simply wait for five seconds without pressing any keypad buttons. This allows the system to store the code.
Helpful Programming Tips:
- Avoid setting a personal code that uses five of the same numbers. This type of code is less secure and easier to guess.
- Do not use five numbers in sequential order (e.g., 12345). Sequential codes are also less secure.
- Remember that the factory-set code will always work, even after you have programmed your own personal code. This provides a backup entry method.
- If you program a new personal code, it will overwrite any previously stored personal code. The factory code will remain unaffected.
Erasing Personal Entry Codes
If you need to erase your personal entry codes, perhaps for security reasons or when selling your vehicle, follow these steps:
-
Enter the factory-set 5-digit code. Upon successful entry, the keyless entry keypad and interior lights will illuminate, and the driver’s door will unlock.
-
Within five seconds of completing step 1, press and release the 1 • 2 button on the keypad.
-
Immediately press and hold the 1 • 2 button again for two seconds. This action will erase all customer-programmed personal codes. After this step, only the factory-set 5-digit code will be functional.
Exiting Programming Mode:
If you need to exit the programming mode at any point, you have two options:
- Wait for five seconds after pressing the 1 • 2 button. The system will automatically time out of programming mode.
- Press the 7 • 8 and 9 • 0 pads simultaneously. This action will lock all vehicle doors and immediately end the programming mode.
Anti-Scan Feature
The 2000 Lincoln LS keyless entry system includes an anti-scan feature for enhanced security. If an incorrect code is entered multiple times consecutively, the keypad will enter anti-scan mode. During this mode:
- The keypad will be disabled for one minute.
- The keypad illumination will flash, indicating the anti-scan mode is active.
The anti-scan feature will automatically turn off after:
- One minute of inactivity on the keypad.
- Pressing the UNLOCK button on your remote entry transmitter (key fob).
- Turning the ignition to the RUN position.
While these instructions primarily cover programming the personal entry code via the keypad, understanding these functions is a key aspect of managing your 2000 Lincoln LS’s keyless entry system. For specific programming related to the key fob remote itself, consulting your owner’s manual for detailed instructions is always recommended. This guide ensures you can confidently manage your 2000 Lincoln LS’s entry system, enhancing both convenience and security.
