Is your 2000 Toyota 4Runner key fob no longer working, or did you get a replacement that needs programming? Don’t worry, you can easily program your key fob yourself without a trip to the dealership. This guide provides simple, step-by-step instructions to get your 2000 Toyota 4Runner key fob programmed quickly and get you back on the road with full keyless entry functionality.
Step-by-Step Guide to Program Your 2000 Toyota 4Runner Key Fob
Follow these instructions carefully to successfully program your 2000 Toyota 4Runner key fob. Make sure to perform the steps within the specified time limits for successful programming.
-
Initial Setup: Begin with your 2000 Toyota 4Runner turned off, key removed from the ignition. Ensure the driver’s side door is open, all other doors are closed, and the driver’s door is unlocked.
-
Key Insertion Sequence (5 seconds):
A. Insert the key into the ignition. Do not turn it. Remove the key.
B. Immediately insert the key into the ignition again. Do not turn it. Remove the key. -
Door and Key Cycling (40 seconds):
A. Close, then open the driver’s side door.
B. Close, then open the driver’s side door again.
C. Insert the key into the ignition. Do not turn it. Remove the key. -
Door and Ignition Sequence (40 seconds):
A. Close, then open the driver’s side door.
B. Close, then open the driver’s side door again.
C. Insert the key into the ignition and leave it in.
D. Close the driver’s door.
E. Turn the ignition to the ON position (without starting the engine), then immediately turn it back to the OFF position.
F. Remove the key from the ignition. -
Confirmation of Programming Mode (3 seconds): At this point, the power door locks should automatically cycle (lock then unlock). This indicates that your 2000 Toyota 4Runner has successfully entered programming mode. If the locks do not cycle, return to step 1 and repeat the process.
-
Key Fob Programming (40 seconds per fob):
A. Simultaneously press and hold the LOCK and UNLOCK buttons on the key fob for 1.5 seconds.
B. Immediately after releasing the LOCK and UNLOCK buttons, press and hold the LOCK button alone for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once to confirm successful programming of that key fob. If the door locks cycle twice, it indicates the remote was not accepted. In this case, repeat steps A and B of step 6 for that remote.
C. Repeat steps A and B in step 6 for each additional 2000 Toyota 4Runner key fob you need to program. -
Exit Programming Mode: Open the driver’s side door to exit the programming mode.
This detailed guide should help you easily program your 2000 Toyota 4Runner key fob. By following these steps, you can save time and money by programming your remote yourself. If you require a replacement key fob for your 2000 Toyota 4Runner, you can order part number HYQ1512Y online.
