2001 Honda Odyssey Key Fob Programming: Step-by-Step Guide

Programming your 2001 Honda Odyssey key fob can be a straightforward process, allowing you to regain keyless entry functionality without a trip to the dealership. Whether you have the EX or LX model, the procedure is designed for user-friendly programming right in your driveway. This guide provides clear instructions tailored to both 2001 Honda Odyssey models, ensuring you can quickly program your key fob.

Programming Your 2001 Honda Odyssey EX Model Key Fob

This section is for the 2001 Honda Odyssey EX model, which comes with a factory-installed keyless entry system. Remember, the system can store up to three remotes. Programming a fourth remote will erase the first one in the memory.

1. Turn the ignition switch to the ON position (II).
2. Within 4 seconds, press the LOCK or UNLOCK button on your remote. Aim the remote at the receiver, located near the glove box.
3. Within 4 seconds, turn the ignition switch to the LOCK position (0).
4. Repeat steps 1, 2, and 3 two more times using the same remote.
5. Within 4 seconds, turn the ignition switch to the ON position (II).
6. Within 4 seconds, press the LOCK or UNLOCK button on the same remote. The power door locks should cycle, indicating you’ve entered programming mode. Press the LOCK or UNLOCK button again.
7. For each additional remote you wish to program, press the LOCK or UNLOCK button. The door locks should cycle after each button press, confirming the system has accepted the remote.
8. Turn the ignition switch to the LOCK position (0) to exit programming mode.
9. Test each programmed remote to ensure they are working correctly.

Programming Your 2001 Honda Odyssey LX Model Key Fob

If you have the 2001 Honda Odyssey LX model with a dealer-installed keyless entry system, follow these steps:

1. Turn the ignition switch to the ON position (II).
2. Press the LOCK or UNLOCK button on one of your remotes. An unprogrammed remote can be used for this step.
3. Turn the ignition switch to the LOCK position (0).
4. Repeat steps 1, 2, and 3 two more times using the same remote.
5. Turn the ignition switch to the ON position (II).
6. Press the LOCK or UNLOCK button on the same remote. The power door locks should cycle to confirm you are in programming mode.
7. Press the LOCK or UNLOCK button on each remote you want to program. The door locks should cycle after each press, confirming successful programming.
8. Turn the ignition switch to the LOCK position (0) to exit programming mode.
9. Test all programmed remotes to verify they are functioning properly.

By following these model-specific instructions, you can easily program your 2001 Honda Odyssey key fob and enjoy the convenience of keyless entry once again.