Losing a key fob is inconvenient, but programming a replacement for your 2002 Honda CRV can often be done at home, saving you from expensive dealership costs. This guide provides simple, step-by-step instructions to program your 2002 Honda Crv Key Fob yourself.
Step-by-Step Programming Guide for Your 2002 Honda CRV Key Fob
Before starting, have all fobs you want programmed, as programming erases previous remotes.
-
Enter and Close Doors: Get into your 2002 Honda CRV and close all doors firmly.
-
Fast Timing: Steps below must be within 5 seconds each. Too slow or mistakes mean restarting. Have keys and remotes ready. Remove remotes from keyrings.
-
Ignition & Lock Cycle (Repeat 3 Times): Repeat these three actions three times:
a. Ignition ON (II): Turn key to “ON” (no engine start).
b. Press Lock: Press and release “LOCK” on a fob (1 second).
c. Ignition OFF (I): Turn key to “OFF”. -
Enter Program Mode: After 3 cycles, turn ignition to “ON” (II) again.
-
Program First Remote: Press “LOCK” on the same remote. Locks should cycle, indicating program mode. Press “LOCK” again; locks cycle again, confirming remote programmed.
-
Program Other Remotes (Optional): For more remotes, repeat step 5 for each within 10 seconds. Max 3 remotes.
-
Exit & Test: Turn ignition “OFF”. Test all programmed fobs. Trunk button might need holding.
Conclusion
Program your 2002 Honda CRV key fob easily with these steps. Follow timing and steps precisely. Enjoy your working key fob!
