Lost your key fob or need to program a new one for your 2004 Chrysler Sebring? It can be a hassle, but thankfully, programming a new key fob for your 2004 Chrysler Sebring can often be done right at home, especially if you already have a working remote. This guide will walk you through the steps to program your 2004 Chrysler Sebring Key Fob, making the process as straightforward as possible.
Programming Your 2004 Chrysler Sebring Key Fob with a Working Remote – Procedure 1
This first procedure is designed for those who currently have a functioning key fob and want to add or reprogram another. Follow these steps carefully to ensure successful programming:
-
Ignition Ready: Begin by inserting the key into the ignition of your 2004 Chrysler Sebring. Turn the key to the “ON” position. It’s crucial to turn the ignition to “ON” without actually starting the engine.
-
Unlock and Hold: Locate your working remote. Press and hold the “Unlock” button on this remote for a full ten seconds. Keep holding the button throughout the next step.
-
Panic Button Press: While still holding the “Unlock” button, press the “Panic” button on the same working remote for just one second. After one second, release both the “Unlock” and “Panic” buttons simultaneously. Listen carefully; your vehicle should “chime”. This chime indicates that your 2004 Chrysler Sebring has entered programming mode and is ready to learn a new key fob.
-
Program the First New Remote: Take the new key fob you wish to program. Press any button on this new remote. Once again, listen for a chime from your vehicle. This second chime confirms that the first new remote has been successfully programmed to your 2004 Chrysler Sebring.
-
Program Additional Remotes (Optional): If you have another key fob to program, now is the time. Press any button on the next key fob. The vehicle will chime again, indicating successful programming of this additional remote. You can repeat this step for any other remotes you need to program at this time.
-
Exit Programming: To finalize the programming process, simply turn the ignition off. Remove the key from the ignition. You can now test all programmed key fobs to ensure they are working correctly with your 2004 Chrysler Sebring.
Alternative Programming Method – Procedure 2
If Procedure 1 doesn’t work for you, or if you want to try an alternative approach, here’s a second method to program your 2004 Chrysler Sebring key fob, also requiring a working remote:
-
Ignition Start (Position ON): Insert your key into the ignition and turn it to the “ON” position, just as in Procedure 1. Do not start the engine.
-
Unlock Button Hold: Press and hold the “Unlock” button on your functioning remote for ten seconds.
-
Panic Button Combination: While keeping the “Unlock” button pressed, press the “Panic” button for one second. Release both buttons at the same time. Again, you should hear the vehicle chime, signaling entry into programming mode.
-
Lock and Unlock Sequence (First New Remote): On the new remote you want to program, press and release both the “Lock” and “Unlock” buttons together. After releasing, immediately press and release the “Unlock” button again by itself. Listen for a chime after each button press. The chimes indicate that the vehicle is recognizing the programming signals.
-
Lock and Unlock Sequence (Second New Remote – Optional): If programming another new remote, repeat the “Lock” and “Unlock” button sequence from step 4 on the second new remote. Press and release “Lock” and “Unlock” together, then press and release “Unlock” alone. Listen for the confirming chimes after each step.
-
Finish Programming: Turn the ignition off to exit the programming mode. Remove the key and test all programmed key fobs to confirm they are now operating your 2004 Chrysler Sebring’s remote entry system.
If you encounter difficulties programming your 2004 Chrysler Sebring key fob using these methods, or if you do not have a working remote to begin with, it is recommended to seek assistance from a professional. Chrysler dealerships or qualified automotive locksmiths have specialized equipment and expertise to program key fobs for your vehicle. You can often find a local key fob programming service by searching online for “key fob programming near me” or “automotive locksmith [your city]”.
