So, you’ve got a 2005 Chevy Impala and need to program a new key fob? Maybe you bought a used Impala that didn’t come with a remote, or perhaps you’ve just purchased a replacement key fob online. Whatever the reason, programming your key fob yourself is a straightforward process that can save you a trip and expense to the dealership. This guide will walk you through the steps to easily program your 2005 Chevy Impala Key Fob right in your driveway.
Before we begin, let’s ensure you have the correct type of key fob for your vehicle. If your Chevy Impala has the RPO code AU0 (Remote Keyless Entry) listed on the service parts identification tag (usually located in the glove box or on the driver’s side door jamb), then you’re in the right place. The compatible key fob part number for your 2005 Impala is often listed as 10443537 or KOBLEAR1XT. Having the correct fob is the first step to successful programming.
Here’s how to program your 2005 Chevy Impala key fob:
-
Ignition and Radio Prep: Begin by turning your ignition key to the “ACC” (Accessory) or “ON” position. It’s important not to start the engine. Make sure your radio is turned off. This ensures the car’s system is ready to enter programming mode without distractions.
-
Enter Settings Menu: Locate the DISP button on your radio. Press and hold this button for approximately five seconds. Keep holding it until the word “settings” appears on the radio display. This action navigates you to the vehicle’s settings menu where key fob programming is located.
-
Navigate to FOB PROG: Once “settings” is displayed, use the SEEK up or down arrow buttons to scroll through the menu options. Continue pressing either the up or down arrow until you see “FOB PROG” appear on the display. This is the specific setting for key fob programming.
-
Enter Submenu – Begin Programming: After “FOB PROG” is visible, press either the PREV (previous) or NEXT button to enter the submenu. You’ll notice an asterisk next to the currently selected option. “BEGIN” will then be displayed, indicating you’re ready to start the programming sequence.
-
Initiate Fob Programming: Press the DISP button one more time to actually begin the programming process. The display will change to “PUSH FOB” flashing on the screen. At this point, take your first key fob and simultaneously press and hold both the LOCK and UNLOCK buttons together for about 15 seconds. As the system learns the transmitter, you will hear an audible chime. This chime is your confirmation that the key fob has been successfully programmed to your 2005 Chevy Impala.
-
Program Additional Fobs (Optional): If you have more than one key fob to program (up to a maximum of four), repeat Step 5 for each additional fob. You do not need to press the DISP button again. Simply press and hold the LOCK and UNLOCK buttons on the next key fob you want to program. Remember to wait for the chime after each fob to confirm successful programming.
-
Exit Programming Mode: Once you have programmed all your desired key fobs, you need to exit the programming mode. To do this, scroll through the settings menu again using the SEEK up or down arrows until you see “EXIT” displayed. Select “EXIT” to leave the feature customization mode. Your newly programmed key fobs should now be working with your 2005 Chevy Impala.
By following these straightforward steps, you can easily program your 2005 Chevy Impala key fob yourself, saving time and money. Enjoy the convenience of remote keyless entry!
