Lost your key fob or need to program a new one for your 2006 Scion XA? You’re in the right place. Programming your key fob yourself can save you time and money compared to dealership services. This comprehensive guide provides step-by-step instructions to program your 2006 Scion XA key fob quickly and easily at home.
Step-by-Step Programming Guide for Your 2006 Scion XA Key Fob
Before you begin, ensure you have your 2006 Scion XA with you and the key fob you wish to program. Follow these instructions carefully for successful programming:
-
Start with the Driver’s Side Door Open: Make sure the driver’s side door is open and unlocked. Also, ensure the key is removed from the ignition switch completely.
-
Ignition Key Insertion and Removal (Twice): Within 5 seconds of starting, insert your key into the ignition switch and remove it immediately. Repeat this insert and remove action a second time.
-
Door Close and Open Cycle (Twice within 40 Seconds): Within 40 seconds of the previous step, close the driver’s side door, and then open it. Repeat this close and open door cycle one more time.
-
Ignition Key Insertion and Removal (Once): Insert the key into the ignition switch and remove it one time.
-
Door Close and Open Cycle (Twice within 40 Seconds): Again, within 40 seconds, close the driver’s side door, then open it. Repeat the close and open door cycle one more time.
-
Ignition Key Insertion and Door Closure: Insert the key into the ignition switch and close the driver’s door. Leave the key in the ignition, but do not turn it on yet.
-
Ignition ON/OFF Cycles (Programming Mode Selection): This step determines the programming mode.
- For programming ONE remote while keeping existing remotes: Switch the ignition from OFF to ON and back to OFF once.
- For programming ONE remote and erasing existing codes: Switch the ignition from OFF to ON and back to OFF twice. Use this if you are replacing a lost fob and want to ensure the old one no longer works.
- To check the number of currently registered remotes: Switch the ignition from OFF to ON and back to OFF three times. The system will indicate the number of programmed remotes by cycling the door locks.
- To erase ALL registered remotes: Switch the ignition from OFF to ON and back to OFF five times. This is useful if you are unsure how many remotes are programmed and want to start fresh.
-
Remove Key from Ignition: Take the key out of the ignition switch.
-
System Lock/Unlock Confirmation: The system should automatically lock and unlock the vehicle doors. The number of times it locks and unlocks (once, twice, or five times) will depend on the mode you selected in step 7. It may also cycle the locks slowly up to four times to indicate how many remotes are currently programmed in memory (if you selected the check remotes mode).
-
Simultaneous Button Press (Within 40 Seconds): Within 40 seconds of the system lock/unlock confirmation, press and release the LOCK and UNLOCK buttons on your new key fob simultaneously.
-
Button Press (Within 3 Seconds): Within 3 seconds of releasing the LOCK and UNLOCK buttons, press and hold either the LOCK or UNLOCK button on the key fob.
-
Programming Confirmation: The system should now lock and unlock the vehicle doors again. One lock/unlock cycle indicates successful programming. Two cycles indicate that programming has failed. If it fails, carefully repeat all steps from the beginning.
-
Programming Additional Remotes (Optional): If you have additional key fobs to program, repeat steps 10 and 11 within 40 seconds of the confirmation in step 12 for each additional remote. You can program up to 4 remotes for your 2006 Scion XA.
-
Exit Programming Mode: To exit the programming mode, simply open the driver’s side door.
Troubleshooting Tips
If you encounter issues while programming your 2006 Scion XA key fob, consider these troubleshooting tips:
- Timing is Crucial: Ensure you are performing each step within the specified time limits. If you are too slow, the system might time out, and you will need to start over.
- Door and Ignition Sensors: Make sure your Scion XA’s door sensors and ignition switch are functioning correctly. A faulty sensor can prevent the system from entering programming mode.
- Battery Condition: Verify that the battery in your new key fob is new and has sufficient charge. A weak battery can lead to programming failure.
- Correct Key Fob Type: Ensure you are using the correct type of key fob for your 2006 Scion XA. The correct part number for the 2006 Scion XA key fob is HYQ12BBX. Using an incompatible fob will not work. You can order the correct part number HYQ12BBX here.
- Repeat and Double-Check: If the programming fails on the first attempt, carefully reread the instructions and repeat the process from step 1. Double-check each step to ensure accuracy.
If you continue to experience difficulties programming your key fob, it might be best to consult a professional automotive locksmith or technician. They have specialized tools and expertise to diagnose and resolve key fob programming issues.
Need a Replacement Key Fob or Professional Help?
If you need to purchase a replacement key fob for your 2006 Scion XA, visit Keylessentryremotefob.com for a wide selection of key fobs and remotes.
If you prefer professional assistance with key fob programming, you can use the search tool on Keylessentryremotefob.com to find a qualified key fob installer in your local area. Simply enter your city or zip code to locate a professional near you who can help.
By following these detailed instructions, you should be able to successfully program your 2006 Scion XA key fob. Enjoy the convenience of keyless entry and remote locking once again!
