Lost your key fob or need to program a new one for your 2007 Acura RDX? No need to worry! Programming your key fob can often be done right at home without special tools. This guide provides simple, step-by-step instructions to program your 2007 Acura RDX key fob quickly and easily.
Programming Your 2007 Acura RDX Key Fob – Step-by-Step Instructions
Follow these instructions carefully to program your 2007 Acura RDX key fob:
-
Ignition ON: Insert your Acura RDX key into the ignition and turn it to the ON position. This is the position just before you would start the engine.
-
Press UNLOCK (Remote 1): Press the UNLOCK button on the first remote key fob you are programming. Make sure to use the same remote for the next few steps until indicated otherwise.
-
Ignition OFF: Turn the ignition key to the OFF position. This is the position where you can remove the key, but do not remove the key from the ignition yet.
-
Ignition ON (Again): Turn the ignition key back to the ON position, just before starting the engine.
-
Press UNLOCK (Remote 1 Again): Press the UNLOCK button on the same first remote key fob again.
-
Ignition OFF (Again): Turn the ignition key to the OFF position once more, and again, do not remove the key.
-
Ignition ON (Third Time): Turn the ignition key back to the ON position for the third time.
-
Press UNLOCK (Remote 1 Third Time): Press the UNLOCK button on the first remote key fob for the third time.
-
Ignition OFF (Final Time before Confirmation): Turn the ignition key to the OFF position for the last time before the confirmation step. Do not remove the key.
-
Ignition ON (Fourth Time – Enter Programming Mode): Turn the ignition key back to the ON position for the fourth time.
-
Press UNLOCK (Remote 1 – Confirmation): Press the UNLOCK button on the first remote key fob one last time. At this point, you should hear the door locks cycle. This indicates that your 2007 Acura RDX has successfully entered key fob programming mode.
-
Program First Remote: Immediately press the UNLOCK button on the first remote key fob again. The door locks should cycle once more, confirming that this remote has been programmed.
-
Program Additional Remotes: If you have additional key fobs to program, repeat step 12 for each additional remote.
-
Exit Programming Mode: Turn the ignition key to the OFF position and remove the key from the ignition. This will exit the key fob programming mode.
Now test each of your programmed key fobs to ensure they are working correctly with your 2007 Acura RDX.
If you encounter any difficulties programming your remote, or prefer professional assistance, you can search for a qualified key fob installer in your local area by entering your city or zip code online. They can provide expert key fob programming services for your Acura RDX.
