Having a key fob for your 2007 Toyota Yaris adds a layer of convenience to your daily driving. Instead of fumbling with keys, a simple press of a button can unlock your doors. However, what happens when your key fob stops working, or you need to program a new one? The good news is, programming a 2007 Toyota Yaris key fob can often be done yourself, without a trip to the dealership. This guide provides you with clear, easy-to-follow instructions to program your 2007 Toyota Yaris key fob quickly and efficiently.
Step-by-Step Programming Instructions
Follow these steps carefully to program your 2007 Toyota Yaris key fob:
-
Start with Key Position: Ensure your key is completely removed from the ignition.
-
Open Driver’s Door: Open and unlock only the driver’s side door. Make sure all other doors, including the trunk or hatchback, are fully closed.
-
Key Insertion Sequence (1): Within a 5-second window, insert your key into the ignition switch, and then immediately pull it out. Repeat this insert and pull out action a second time, for a total of two insertions and removals.
-
Door Close-Open Sequence (1): Close the driver’s side door, and then open it again. Repeat this close and open action a second time, for a total of two closes and opens.
-
Key Insertion Sequence (2): Insert the key into the ignition switch, and then remove it. Do this only once.
-
Door Close-Open Sequence (2): Close the driver’s side door, and then open it again. Repeat this close and open action a second time, for a total of two closes and opens.
-
Key Insertion and Leave In: Insert the key into the ignition switch and this time, leave it in the ignition. Do not remove it.
-
Close Driver’s Door: Close the driver’s side door.
-
Ignition Cycle: Turn the ignition switch to the “ON” position, and then immediately turn it back to the “OFF” position. “ON” is the position right before you would start the engine.
-
Remove Key: Take the key out of the ignition switch.
-
Lock Cycle Confirmation: At this point, the door locks should automatically cycle (lock then unlock). This indicates that your 2007 Toyota Yaris has successfully entered programming mode and is ready to learn the new key fob.
-
Key Fob Programming: Take your first key fob that you wish to program. Press and hold both the “LOCK” and “UNLOCK” buttons simultaneously for about 1.5 seconds. After releasing both buttons, immediately press and hold only the “LOCK” button for 2 seconds.
-
Programming Confirmation: The door locks will cycle once again to confirm that the key fob has been successfully programmed. If you have additional key fobs to program, repeat step 12 with each fob. If you are finished programming all your key fobs, proceed to the next step.
-
Exit Programming Mode: Open the driver’s side door. This action will signal to the vehicle that you have completed the key fob programming process, and programming mode will now be exited.
Congratulations! You have now successfully completed the 2007 Toyota Yaris Key Fob Programming procedure. Your newly programmed key fob should now be fully functional, allowing you to lock and unlock your doors with ease.
If you encounter any difficulties during this programming process, or if you are looking to purchase a replacement key fob for your 2007 Toyota Yaris, visit Keylessentryremotefob.com for a wide selection of key fobs and expert assistance. You can also search for a local professional installer if you prefer to have your key fob programmed by a qualified technician.
