Lost your key fob or need to program a new one for your 2008 Cadillac Escalade? Don’t worry, you can easily program your key fob yourself right at home! This guide provides simple, step-by-step instructions to get your remote working again in no time. Whether your Escalade is equipped with a Driver Information Center (DIC) or not, we’ve got you covered.
Programming Your 2008 Cadillac Escalade Key Fob with the Driver Information Center (DIC)
If your Cadillac Escalade has a Driver Information Center, programming your key fob is straightforward. Follow these simple steps:
- Turn Ignition to ON: Insert your key into the ignition and turn it to the “ON” position. This is the position right before you start the engine. Make sure you can access your Driver Information Center display.
- Access Vehicle Information Menu: Use the vehicle information button, usually located on the steering wheel or the center console, to scroll through the DIC menus until you see PRESS TO RELEARN REMOTE KEY displayed.
- Enter Relearn Mode: Once PRESS TO RELEARN REMOTE KEY is displayed, press the set/reset button. This will initiate the key fob programming sequence, and the DIC should display REMOTE KEY LEARNING ACTIVE.
- Program the First Key Fob: Take your first keyless remote (the one you want to program). Simultaneously press and hold both the lock and unlock buttons. Keep holding them for approximately 15 seconds. After about 15 seconds, you should hear a chime sound. This chime indicates that the remote has been successfully programmed.
- Program Additional Key Fobs (Optional): If you need to program more key fobs, repeat step 4 immediately. You can program up to a maximum of eight remotes for your 2008 Cadillac Escalade.
- Exit Programming Mode: To finish the programming process, simply turn the ignition key to the “OFF” position and remove the key from the ignition.
- Test Your Key Fobs: Test each programmed key fob to ensure they are working correctly by pressing the lock and unlock buttons and verifying the vehicle responds.
Programming Your 2008 Cadillac Escalade Key Fob Without the Driver Information Center (DIC)
If your 2008 Cadillac Escalade model does not have the Driver Information Center buttons, you can still program your key fob using a slightly different procedure. Here’s how:
- Prepare the Vehicle: Ensure your vehicle is in Park (P) and the ignition key is in the “ON” position. Turn the key as far as it will go without starting the engine.
- Access Relearn Mode: Locate the trip odometer reset stem, usually protruding from the instrument cluster. Press and release this stem repeatedly until RELEARN REMOTE KEY is displayed in the instrument panel.
- Initiate Learning Activation: Once RELEARN REMOTE KEY is displayed, press and hold the trip odometer reset stem for about three seconds. The message REMOTE KEY LEARNING ACTIVE will then appear, indicating the system is ready to program key fobs.
- Program the First Key Fob: Take your first key fob and press and hold the lock and unlock buttons simultaneously for around 15 seconds. Listen for a chime sound, which confirms successful programming of the remote.
- Program Additional Key Fobs (Optional): If you have additional key fobs to program, repeat step 4 right away. You can program up to eight key fobs in total.
- Exit Programming Mode and Test: Turn the ignition key to the “OFF” position and remove the key. Test all programmed key fobs to confirm they lock and unlock your Escalade.
Need a Replacement Key Fob?
If you need a replacement key fob for your 2008 Cadillac Escalade or any other vehicle, be sure to visit us at Keylessentryremotefob.com. We offer a wide selection of key fobs and remotes at competitive prices. You can order the correct key fob for your 2008 Cadillac Escalade using part number 15913421.
Professional Programming Assistance
If you encounter any difficulties programming your key fob or prefer professional assistance, you can find a local key fob installer in your area. Simply enter your city or zip code in the search box on our website to find a qualified professional near you.
We hope this guide helps you successfully program your 2008 Cadillac Escalade key fob! If you have any questions or suggestions, feel free to leave a comment below. Share this guide with friends and family who might find it helpful!
