Is your 2008 Dodge Durango key fob malfunctioning, or did you get a replacement and need to program it? You’ve come to the right place. Programming your key fob yourself can save you time and money compared to going to a dealership. This guide provides straightforward instructions to program a 2008 Dodge Durango key fob, assuming you have two already working key fobs.
Before you start, it’s crucial to understand a few prerequisites. This procedure is specifically for 2008 Dodge Durango models manufactured in the USA. Also, and this is very important: you must have two currently working, programmed key fobs to add a third one using this DIY method. If you only have one working key fob, or none at all, this procedure will not work. In such cases, you will need to visit a professional locksmith or dealership to get your key fob programmed. They have specialized equipment to handle situations where you don’t have existing programmed fobs. If you find yourself in that situation, consider searching online for a “car locksmith near me” to find local professionals who can assist you.
Now, if you meet the crucial requirement of having two working key fobs, here’s how to program an additional 2008 Dodge Durango key fob:
Step-by-Step Key Fob Programming Instructions:
-
Initial Key Activation: Take your first, already programmed key fob. Insert it into the ignition and turn the ignition switch to the ON position. Do not start the engine. Leave it in the ON position for 5 seconds. After 5 seconds, turn the ignition OFF and remove the key fob.
-
Second Key Activation: Immediately, within 5 seconds of removing the first key, insert your second, already programmed key fob into the ignition. Again, turn the ignition to the ON position, without starting the engine. Within about 10 seconds, you should observe the security light on your dashboard begin to flash. You may also hear a chime sound. Once you see the flashing security light and/or hear the chime, turn the ignition OFF and remove the second key fob. Note: Some 2008 Dodge Durango models may only flash the security light and not produce a chime, so watch for the light if you don’t hear a chime.
-
New Key Fob Programming: Within 5 seconds of removing the second programmed key, insert your new, unprogrammed key fob into the ignition. Turn the ignition to the ON position (do not start the engine). The security light should again begin to flash. Within 10 seconds, you should hear a chime, and the security light should turn off. The security light turning off indicates that the new key fob has been successfully programmed. Turn the ignition OFF and remove the new key fob.
-
Test the New Key Fob: Thoroughly test the newly programmed key fob to ensure all buttons are working correctly – lock, unlock, panic button, and remote start if your Durango is equipped with it. Start your vehicle with the new key to confirm the programming is complete.
If you encounter difficulties during this programming process, or if you prefer professional assistance, remember that locksmiths specializing in automotive key programming are readily available. They can handle various key fob programming needs, especially situations where you don’t have existing working keys. You can easily find a local locksmith by searching online using terms like “key fob programming near me” or “automotive locksmith services.”
By following these steps, you should be able to easily program your new 2008 Dodge Durango key fob and get back on the road with a fully functional remote.
