Lost your 2009 Nissan Cube Key Fob or need to program a new one? Heading to the dealership can be costly, but the good news is, programming your key fob yourself is a straightforward process you can complete at home in just a few minutes. This guide will walk you through the steps to program a 2009 Nissan Cube key fob, saving you time and money.
Step-by-Step Guide to Program Your 2009 Nissan Cube Key Fob
Programming your Nissan Cube key fob involves a sequence of actions that puts your vehicle into programming mode, allowing it to recognize the new remote. Here’s how to do it:
Step 1: Get Inside Your 2009 Nissan Cube
First, ensure you are inside your 2009 Nissan Cube. Close all doors, then open and close the driver’s side door again, making sure you are positioned in the driver’s seat. Manually lock all doors using the power lock switch on the driver’s side door.
Step 2: Initiate Programming Mode
This step is crucial for your Nissan Cube to enter programming mode. Insert your key into the ignition. Now, quickly insert and remove the key from the ignition cylinder approximately 6 times. You need to perform this action rhythmically, within a 10-second timeframe. It might take between 6 to 10 tries for the system to register. If done correctly, your hazard lights will flash twice, indicating that your 2009 Nissan Cube has successfully entered programming mode.
Step 3: Program the First Key Fob
Once the hazard lights have flashed, immediately re-insert the key into the ignition and turn it to the “ACC” (Accessory) position. Within 5 seconds of turning the key to ACC, press any button on your first key fob remote once. If the programming is successful for this key fob, the hazard lights should flash again.
Step 4: Program Additional Key Fobs (Optional)
If you have another 2009 Nissan Cube key fob to program, unlock then lock the doors again using the driver’s side power lock switch. Then, press any button on the second key fob remote. The hazard lights should flash again to confirm successful programming of the second remote.
Step 5: Finalize and Test
After programming all your key fobs, turn the ignition key to the “OFF” position and remove the key from the ignition. Exit the vehicle and test each key fob to ensure they are correctly programmed. Try locking and unlocking the doors, as well as activating the panic alarm to confirm full functionality.
Tips for Successful Key Fob Programming
- Timing is Key: The timing of inserting and removing the key and pressing the key fob button is important. Follow the timeframes mentioned in each step closely.
- Genuine or Compatible Fobs: Ensure you are using key fobs that are compatible with your 2009 Nissan Cube. OEM (Original Equipment Manufacturer) fobs or reliable aftermarket replacements are recommended. You can often find these online from reputable sellers.
- Battery Check: Before starting, make sure the batteries in your key fobs are new and functioning. Low battery power can sometimes interfere with the programming process.
- Troubleshooting: If the hazard lights do not flash to confirm programming mode or key fob registration, repeat the steps carefully. If you continue to experience issues, double-check the compatibility of your key fobs with your 2009 Nissan Cube model.
Programming your 2009 Nissan Cube key fob yourself is an empowering way to save money and time. By following these simple steps, you can quickly regain keyless entry functionality without a trip to the dealership.
