Are you in need of a new ignition key for your 2011 Buick Enclave? Losing or damaging your car keys can be a frustrating experience. Fortunately, replacing your 2011 Buick Enclave Key Fob doesn’t have to be a complicated or overly expensive process. This aftermarket transponder chip key is designed to be a reliable and cost-effective solution to get you back on the road.
Understanding your 2011 Buick Enclave key fob is crucial. This isn’t just a simple metal key; it’s equipped with a transponder chip. This chip is a vital part of your vehicle’s security system, communicating with your car’s immobilizer to prevent theft. Because of this technology, simply cutting a new key won’t be enough to start your Buick Enclave. The transponder chip needs to be programmed to your vehicle.
When you purchase this replacement key, it will arrive uncut and unprogrammed. You’ll need to have it professionally cut to match your vehicle’s ignition. Most local automotive locksmiths or hardware stores offer key cutting services. They will likely require proof of vehicle ownership, such as your registration or insurance card, to ensure security and prevent unauthorized key duplication. To find a qualified locksmith in your area, you can use online resources like a Locksmith Search.
The good news is that you can program this key yourself at home if you already have at least one working key. This can save you the expense of a dealership programming. We provide detailed programming instructions for both situations: adding an extra key and all keys lost scenarios. Remember, we do not offer key cutting or programming services at our facility; our expertise lies in providing high-quality replacement keys.
This replacement ignition key, identified as B111, is compatible with a range of GM vehicles, not just the 2011 Buick Enclave. It uses a Philips 46 (Circle+) chip ID and serves as an aftermarket replacement for various part numbers, including those from A1, Ilco, Hata, Jet, Strattec, and OEM (23372322). It’s also known as test key B106 / B109 and falls under code series G0001-3631 with groove 93.
Vehicle Compatibility:
This key is compatible with a wide range of Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, and Suzuki models from various years, including:
- Buick Enclave (2008-2017)
- Buick Lucerne (2006-2011)
- Cadillac CTS (2008-2014)
- Cadillac DTS (2006-2011)
- Cadillac Escalade (2007-2014)
- Cadillac SRX (2007-2009)
- Cadillac STS (2004-2011)
- Chevrolet Avalanche (2007-2013)
- Chevrolet Cobalt (2006-2010)
- Chevrolet Equinox (2007-2009)
- Chevrolet Express (2008-2017)
- Chevrolet HHR (2006-2011)
- Chevrolet Impala (2006-2016)
- Chevrolet Malibu (2004-2012)
- Chevrolet Monte Carlo (2006-2007)
- Chevrolet Silverado (2007-2013 & 2014 Silverado 2500HD/3500HD)
- Chevrolet Suburban (2007-2014)
- Chevrolet Tahoe (2007-2014)
- Chevrolet Traverse (2009-2017)
- GMC Acadia (2007-2017)
- GMC Savana (2008-2014)
- GMC Sierra (2007-2013)
- GMC Yukon (2007-2014)
- Hummer H2 (2008-2009)
- Pontiac G5 (2007-2009)
- Pontiac G6 (2005-2010)
- Pontiac Pursuit (2005-2006)
- Pontiac Solstice (2006-2009)
- Pontiac Torrent (2007-2009)
- Saturn Aura (2007-2010)
- Saturn Outlook (2007-2010)
- Saturn Sky (2007-2009)
- Suzuki XL-7 (2007-2009)
Programming Instructions
ALL KEYS LOST/MISPLACED
- Insert the new cut key into the ignition cylinder and turn it to the ON position. The security light will illuminate for approximately 10 minutes. Wait until the security light turns off. You have one minute to proceed to the next step once the light goes out.
- Turn the ignition to OFF, then back to the ON position. Again, the security light will stay on for 10 minutes. Wait for it to turn off. You have one minute to proceed.
- Repeat step 2 one more time. The security light will illuminate for a final 10 minutes, then turn off.
- After the security light has turned off for the third time, turn the key off and remove it from the ignition. The key is now programmed, and any previously programmed keys will be erased.
- Insert the new key and start your vehicle to verify successful programming.
TO ADD AN EXTRA KEY (Must have at least one working key)
- Insert an existing, programmed working key into the ignition cylinder.
- Turn the ignition to the ON position for 5 seconds, then turn it back to the OFF position.
- Remove the working key and within 5 seconds, insert the new, uncut key into the ignition. Turn it to the ON position for 5 seconds.
- Turn the key to the OFF position, then back to ON. The new key should now be programmed. Start your vehicle to test the key.
What’s Included:
- One aftermarket ignition key blank with transponder chip
- 90-day satisfaction guarantee and warranty
With this replacement 2011 Buick Enclave key fob, you can regain the convenience and security you expect from your vehicle. It’s a straightforward and economical way to address lost or damaged keys, ensuring you’re never stranded without a reliable way to start your car.
