Lost or broken your 2011 Cadillac SRX key fob? Don’t worry, replacing it and getting back on the road is easier than you might think. This guide provides comprehensive, step-by-step instructions on how to program a new key fob for your 2011 Cadillac SRX, even if you don’t have a working original. Whether you purchased a replacement key fob online or from a dealership, this method will help you get it synced with your vehicle quickly and efficiently.
Step-by-Step Programming Guide for Your 2011 Cadillac SRX Key Fob
This programming procedure is designed for Keyless Access Vehicles and is applicable when you do not have a recognized transmitter available. Please note that this specific feature might not be available in Canada. The entire process will take approximately 30 minutes, so ensure you have ample time and are near your vehicle with all the new key fobs you intend to program.
Preparation
Before starting, make sure of the following:
- Vehicle is OFF: Ensure your 2011 Cadillac SRX is completely turned off.
- All Transmitters Present: Have all the new key fobs you wish to program with you inside the vehicle.
- Driver’s Door Access: You will need access to the driver’s side door and its key lock cylinder.
Now, let’s begin the programming sequence:
Step 1: Initial Key Turn and Wait
Alt text: Close-up of the driver’s side door lock cylinder on a 2011 Cadillac SRX, highlighting the key insertion point.
Insert the vehicle key, which is part of your new transmitter, into the key lock cylinder located on the outside of the driver’s door. Turn the key to the UNLOCK position five times in quick succession, within a 10-second timeframe.
After correctly performing this step, the Driver Information Center (DIC) display inside your Cadillac SRX will show the message: REMOTE LEARN PENDING, PLEASE WAIT. This indicates that your vehicle has entered the key fob programming mode.
Step 2: First 10-Minute Wait
Alt text: The Driver Information Center (DIC) of a 2011 Cadillac SRX displaying “REMOTE LEARN PENDING, PLEASE WAIT” message during key fob programming.
Now, you must wait for ten minutes. During this time, the DIC will continue to display REMOTE LEARN PENDING, PLEASE WAIT. Do not interrupt this process. Patience is key here.
After the ten-minute wait, the DIC display will change to: PRESS ENGINE START BUTTON TO LEARN.
Step 3: Second 10-Minute Wait
Once you see the PRESS ENGINE START BUTTON TO LEARN message, press the ignition button in your Cadillac SRX.
The DIC display will revert back to showing REMOTE LEARN PENDING, PLEASE WAIT. You must now repeat the ten-minute waiting period as described in Step 2.
Step 4: Third 10-Minute Wait and Ready State
Repeat Step 2 and Step 3 one more time. This means you will have completed three ten-minute waiting intervals in total.
After the third waiting period and pressing the ignition, your 2011 Cadillac SRX will clear its memory of previously programmed key fobs. Important: Any old key fobs will no longer work after this step. However, this is necessary to program your new transmitter.
The DIC display should now show: READY FOR REMOTE # 1. This confirms that your system is ready to learn the new key fob.
Step 5: Placing the New Transmitter
Alt text: Interior view of a 2011 Cadillac SRX center console, with the storage compartment open and the transmitter pocket location indicated.
Locate the transmitter pocket inside your 2011 Cadillac SRX. It’s situated within the center console storage area, between the driver and front passenger seats. Open the storage compartment and lift up the storage tray to access the transmitter pocket.
Place your new key fob (transmitter) directly into this pocket.
Step 6: Finalizing the Programming
With the new transmitter placed in the pocket, press the ignition button once more.
When the transmitter is successfully learned by the system, the DIC display will show a message indicating it’s ready to program the next transmitter, or a confirmation that the programming was successful.
Remove the transmitter from the pocket and test it by pressing the LOCK or UNLOCK buttons to ensure it is working correctly with your 2011 Cadillac SRX.
Congratulations! You have successfully programmed a new key fob for your 2011 Cadillac SRX. If you have additional key fobs to program, you may be able to do so following the prompts on the DIC, or you may need to repeat the entire procedure. Always consult your owner’s manual for the most specific instructions for your vehicle.
