Are you looking to replace or add a key fob for your 2011 Chevy Silverado 1500? Many Silverado owners discover that programming a new key fob for models from 2011 onwards isn’t as straightforward as it used to be. The in-vehicle DIC (Driver Information Center) programming procedure, available in older models, was removed, leading many to believe that expensive dealership programming was the only option.
Forums are filled with discussions highlighting this issue, with owners facing hefty bills just to get a new key fob programmed. The common perception is that a trip to the dealer and the use of a Tech II tool are mandatory, resulting in significant costs.
However, there’s good news for 2011 Chevy Silverado 1500 owners! A cost-effective and DIY-friendly solution exists: the Dorman replacement key fob kit. This kit includes not only a new key fob but also an OBD II programmer module, eliminating the need for dealership programming and expensive tools. Priced typically between $50 and $75, this Dorman kit (like the Dorman 99162) offers substantial savings. You can find these kits at retailers like Rock Auto.
http://www.rockauto.com/en/moreinfo.php?pk=6690880&jsn=__GIX__3__
Programming your 2011 Chevy Silverado 1500 Key Fob with the Dorman module is surprisingly simple. The kit comes with detailed instructions, but here’s a quick rundown:
- Turn your Silverado’s ignition to the “ON” position – do not start the engine.
- Ensure all doors are fully closed.
- Plug the Dorman OBD II module into your vehicle’s OBD II port, usually located under the dashboard on the driver’s side. The DIC should display a message indicating that key fob relearning is active, similar to the older manual DIC procedure.
- Wait for the programmer module to chime. This indicates it’s ready for programming.
- Press and hold both the “LOCK” and “UNLOCK” buttons simultaneously on the new key fob. When the module chimes again, the key fob is successfully programmed. Release the buttons.
- Repeat step 5 for any additional new key fobs you want to program, including your existing fobs if you want to reprogram them.
- When the programmer module begins to chime continuously, the relearning mode is deactivated, and programming is complete.
- Note that the Dorman module can typically be used to program fobs up to 3 times before it becomes inactive – a security feature to prevent unauthorized use.
This Dorman solution is a game-changer for 2011 Chevy Silverado 1500 owners needing a new key fob. It’s a DIY alternative that saves significant money compared to dealer programming. By using the Dorman programmer, you can easily program a new fob, a spare, or even reprogram your original fob, all for under $75. As long as the key fobs are compatible with your vehicle, the Dorman module handles the programming seamlessly. Consider the Dorman key fob programmer for a hassle-free and budget-friendly 2011 Chevy Silverado 1500 key fob replacement or addition.
