Is your 2012 Nissan Juke key fob not working? You’re likely dealing with a dead battery. It can be frustrating when your key fob fails to unlock your car, especially when you’re in a hurry. The good news is that replacing the battery in your 2012 Nissan Juke key fob is a straightforward task you can easily handle yourself in just a few minutes.
Here’s a simple, step-by-step guide on how to change the battery in your 2012 Nissan Juke key fob and get you back on the road quickly.
View Our New Nissan Selection
Contact Us
What Battery Size Does a 2012 Nissan Juke Key Fob Need?
The 2012 Nissan Juke Key Fob Battery Size is a CR2032. This is a common 3V coin cell battery that is widely available at most drugstores, supermarkets, and online retailers. It’s always a good idea to keep a few of these batteries at home, as they are used in many small electronic devices. For your 2012 Nissan Juke key fob battery replacement, ensure you purchase a CR2032 3V battery for optimal performance.
Step-by-Step Guide to Replacing Your 2012 Nissan Juke Key Fob Battery
While replacing the 2012 Nissan Juke key fob battery is simple, it’s important to handle the electronic components with care. Using gloves can prevent transferring oils from your skin to the delicate internal parts. Here’s how to replace your 2012 Nissan Juke key fob battery:
-
Prepare Your Key Fob: Turn your Nissan Juke key fob to the back side.
-
Release the Emergency Key: Locate the small slider or button designed to release the mechanical emergency key. Slide or press it to unlock and remove the emergency key from the fob.
-
Open the Key Fob Casing: Once the emergency key is removed, you’ll see a small notch or opening on the top edge of the key fob, where the key was located. This notch is designed to help you split the fob casing.
-
Use a Flathead Screwdriver: Insert a small flathead screwdriver into the notch. Gently twist the screwdriver to carefully separate the front and back halves of the key fob. Take your time and avoid applying excessive force to prevent damage to the plastic casing.
-
Locate the Old Battery: Carefully open the back half of the key fob. You will see the CR2032 battery nestled inside.
-
Remove the Dead Battery: Use the flathead screwdriver to gently pop out the old, dead CR2032 battery. Note the orientation of the battery before removing it; usually, the positive (+) side is facing down.
-
Install the New Battery: Insert the new CR2032 3V battery. Ensure the + side is facing down when you place it into the battery compartment. Click the new battery firmly into place to ensure good contact.
-
Reassemble the Key Fob: Carefully align the front and back halves of the key fob. Squeeze them firmly together until you hear a click, ensuring that the casing is securely closed.
-
Replace the Emergency Key: Slide the emergency key back into its slot until it clicks into place.
-
Test Your Key Fob: Press the buttons on your key fob to test if it is now working correctly. Your 2012 Nissan Juke should now respond to your key fob commands.
By following these simple steps, you’ve successfully replaced the battery in your 2012 Nissan Juke key fob. You’ve saved yourself a trip to the dealership and the inconvenience of a non-functional key fob.
Need Professional Assistance?
If you prefer not to handle the battery replacement yourself, or if you encounter any issues, the service team at Palm Springs Nissan is ready to assist. You can easily schedule a service appointment and let our expert technicians take care of it. Don’t forget to check our service specials to see if there are any offers available that can save you money on your service.
More How-To Guides
Related Posts
[
How to Reset Tire Pressure Light in Your New Nissan Vehicle ](https://www.palmspringsnissan.com/blog/how-to-reset-tire-pressure-light/)
[
