Is your 2013 Nissan Juke key fob not working? You’re likely facing a dead battery. Don’t worry, replacing it is a simple task you can handle yourself in just a few minutes. This guide will walk you through each step to get your key fob back in action.
It might seem daunting to work with car electronics, but changing your Nissan Juke key fob battery is surprisingly straightforward. By following these instructions, you’ll save time and avoid a trip to the dealership for a minor issue. All you need are a few readily available items and a little patience.
What You’ll Need
Before you begin, gather these simple tools:
- A new CR2032 3V battery: This is the standard battery for most Nissan key fobs, including the 2013 Juke. You can find these at most drugstores, supermarkets, and online retailers for a low price. Consider buying a multipack to have spares for the future.
- A small flathead screwdriver: This will be used to gently open the key fob casing.
It’s also a good idea to wear gloves to keep the internal components of your key fob clean and free from oils from your skin.
Step-by-Step Guide to Battery Replacement
Follow these steps to replace the battery in your 2013 Nissan Juke key fob:
-
Turn the Key Fob Over: Start by flipping your Nissan Juke key fob to the back side.
-
Release the Emergency Key: Locate the small slider or button designed to release the emergency mechanical key. Slide or press it to unlock and remove the emergency key from the fob.
-
Find the Notch: Look for a small notch or slot on the top edge of the key fob, where the emergency key was just removed. This notch is designed to allow you to separate the two halves of the fob.
-
Insert the Screwdriver: Carefully insert the tip of your flathead screwdriver into the notch.
-
Open the Casing: Gently twist the screwdriver. This should begin to separate the front and back halves of the key fob. You might hear a slight clicking sound as the clips release. Avoid using excessive force to prevent damage to the casing.
-
Locate the Old Battery: Once the fob is open, you’ll see the internal components. The dead CR2032 battery will be visible, usually held in place by small clips.
-
Remove the Old Battery: Use the flathead screwdriver to carefully pop out the old battery. Pry gently from the side, being careful not to damage the surrounding electronics.
-
Insert the New Battery: Take your new CR2032 battery and insert it into the battery compartment. Ensure the + (positive) side of the battery is facing down as indicated in the battery compartment.
-
Click the New Battery into Place: Press down on the new battery until it clicks securely into its position.
-
Reassemble the Key Fob: Carefully align the front and back halves of the key fob.
-
Close the Casing: Squeeze the two halves firmly together until they snap back into place. You should hear a click confirming they are securely closed.
-
Replace the Emergency Key: Slide the emergency key back into its slot until it clicks and locks into position.
Nissan key fob with emergency key removed and screwdriver inserted to open casing
Your 2013 Nissan Juke Key Fob Battery replacement is now complete! Test the buttons to ensure your Juke responds as expected.
Still Having Trouble?
If you’re not comfortable performing this battery replacement yourself, or if you continue to experience issues with your 2013 Nissan Juke key fob after replacing the battery, the service professionals at your local Nissan dealership are ready to assist. They can diagnose any potential underlying problems and ensure your key fob is working correctly. Consider scheduling a service appointment for expert help. You can also inquire about service specials to potentially save on maintenance costs.
