Is your 2013 Subaru Impreza key fob acting up? Perhaps you have to press the buttons multiple times, or maybe it’s stopped working altogether. The most likely culprit is a dead battery. Don’t worry, replacing the battery in your Subaru Impreza key fob is a straightforward task you can easily handle yourself. This guide will walk you through the process step-by-step, saving you time and a trip to the dealership for a simple fix.
Whether you’re experiencing the frustration of an unresponsive key fob in Orlando, or preparing for preventative maintenance in Sanford, understanding how to replace your key fob battery is a valuable skill for any Subaru Impreza owner. Let’s get started and get your key fob working like new again.
Step-by-Step Guide to Replacing Your 2013 Subaru Impreza Key Fob Battery
For the 2013 Subaru Impreza, you’ll primarily encounter the bulging rectangle-shaped key fob. This design is user-friendly, and replacing the battery requires minimal tools. Here’s how to do it:
What You’ll Need:
- A new CR2032 battery. These are widely available at drugstores, supermarkets, auto parts stores, and online retailers.
- A small flathead screwdriver (optional, but helpful)
Steps:
-
Remove the Emergency Key: Locate the small silver tab on the back of your key fob. Press and hold this tab to release and remove the metal emergency key. Slide the key out and set it aside.
-
Pry Open the Key Fob: With the emergency key removed, you’ll see a seam running along the edge of the key fob. This is where you’ll carefully pry it open. You can often use your fingernail to start opening the case. If it’s a bit tight, gently insert a small flathead screwdriver into the seam and twist lightly to separate the two halves of the fob. Be careful not to apply too much force to avoid damaging the plastic casing.
-
Locate the Battery: Once the fob is open, you’ll see the transmitter circuit board and the round, flat CR2032 battery. The battery might be positioned either on top of or underneath the circuit board depending on how the fob opens.
-
Replace the Battery: Carefully remove the old battery. You might be able to gently pry it out with your fingernail or the tip of the flathead screwdriver. Take note of the battery’s orientation – the positive (+) side should be facing upwards. Install the new CR2032 battery, ensuring the positive (+) side is facing the same direction as the old battery. Try to minimize touching the flat surfaces of the new battery with your fingers; holding it by the edges is best to avoid transferring oils.
-
Reassemble the Key Fob: Carefully snap the two halves of the key fob casing back together. Ensure they are firmly closed and that there are no gaps. Re-insert the metal emergency key until it clicks into place.
What Battery Does a 2013 Subaru Impreza Key Fob Need?
The 2013 Subaru Impreza key fob with the bulging rectangle shape uses a CR2032 battery. It’s always a good idea to double-check your owner’s manual to confirm the correct battery type for your specific key fob, but for most 2013 Impreza models, the CR2032 is the standard.
Troubleshooting Key Fob Issues After Battery Replacement
In most cases, replacing the battery will solve the problem of a non-working or weak key fob. However, if you’re still experiencing issues after replacing the battery, here are a few things to consider:
- Battery Orientation: Double-check that you installed the new battery with the positive (+) side facing up, just as the old battery was oriented.
- Battery Quality: Ensure you are using a fresh, high-quality CR2032 battery from a reputable brand. Sometimes, older or low-quality batteries can be faulty even if they are new.
- Key Fob Damage: Inspect the circuit board and battery contacts inside the key fob for any signs of damage, corrosion, or debris. If you notice any damage, the key fob itself might need to be replaced.
- Key Fob Programming: In rare cases, especially if the battery was dead for an extended period, your key fob might need to be reprogrammed to your vehicle.
When to Consider Professional Service
If you’ve replaced the battery and are still having trouble with your 2013 Subaru Impreza key fob, or if you’re uncomfortable performing the battery replacement yourself, Subaru North Orlando is here to help. Our expert service technicians can quickly diagnose any key fob issues, replace the battery, or program a new key fob if necessary. Contact us today or schedule a service appointment online for fast and reliable service. We also offer service specials to help you save on your Subaru maintenance needs.
Replacing your 2013 Subaru Impreza Key Fob Battery is usually a simple DIY fix. By following these steps, you can get back on the road with a functioning key fob in no time.
