Are you having trouble with your 2015 Chevy Cruze key fob, or do you need to program a new one? As a content creator at keyfobprog.com and an auto repair expert, I understand the frustration of key fob issues. Luckily, programming a key fob for your 2015 Chevy Cruze with push-button start can often be done yourself, saving you time and money compared to dealership visits.
This comprehensive guide will walk you through the process of programming your 2015 Chevy Cruze key fob. We’ll cover scenarios for when you have an existing working key fob and when you’ve lost all your fobs. Follow these instructions carefully to get your key fob working smoothly again.
Programming Your 2015 Chevy Cruze Key Fob When You Have a Working Key
If you already have one functioning key fob for your 2015 Chevy Cruze, programming a new one is a relatively straightforward process. This method allows you to add new key fobs without erasing the memory of your existing ones, and you can program up to five key fobs for your vehicle. Before you begin, ensure the new key blade is cut to match your vehicle’s ignition.
Here’s how to program your 2015 Chevy Cruze key fob when you have a working fob:
-
Locate the Working Transmitter: Ensure you have your currently programmed and working key fob with you, along with the new key fob you wish to program.
-
Prepare the Vehicle: Make sure your Chevy Cruze is turned off. Have all key fobs (both working and new) inside the vehicle with you.
-
Position the Working Fob: Place the recognized, working transmitter in the cupholder of your Chevy Cruze. This is a designated spot that helps the vehicle recognize the fob during the programming process.
-
Use the New Key in the Door Lock: Take the new, unprogrammed key and insert the physical key blade into the driver’s side door lock cylinder.
-
Turn the Key to Unlock Repeatedly: Turn the key to the “unlock” position five times in rapid succession, within a 10-second timeframe. This action signals the vehicle to enter key fob programming mode.
-
Check for DIC Message: After turning the key, look at your Driver Information Center (DIC) display. It should display a message that reads “Ready For Remote #2, 3, 4, or 5.” This message confirms that your Chevy Cruze is now ready to learn a new key fob.
-
Place the New Fob in the Transmitter Pocket: Locate the transmitter pocket. This pocket is situated inside the center console storage area, underneath the cupholder. You may need to pull out the cupholder insert to access it. Place the new key fob into this transmitter pocket.
-
Press the Ignition Button: With the new key fob in the transmitter pocket, press the ignition button on your Chevy Cruze.
-
Verify Programming: Once the new transmitter is successfully programmed, the DIC display will update to indicate it’s ready for the next remote to be programmed.
-
Remove and Test: Take the new key fob out of the transmitter pocket and press the “unlock” button on the fob. If the doors unlock, the key fob is successfully programmed.
-
Program Additional Fobs (If Needed): To program more key fobs, repeat steps 7 through 10.
-
Exit Programming Mode: When you have programmed all desired key fobs, press and hold the ignition button for approximately 5 seconds to exit the key fob programming mode.
Programming Your 2015 Chevy Cruze Key Fob When You Don’t Have a Working Key
If you’ve lost all your working key fobs for your 2015 Chevy Cruze, don’t worry, you can still program new ones. However, this procedure is more time-consuming, taking approximately 30 minutes to complete. It’s also recommended to connect your vehicle to a power source, like jumper cables connected to another running vehicle, to prevent battery drain during the process. Ensure the new key blade is cut before starting.
Here’s the procedure to program a 2015 Chevy Cruze key fob when you don’t have a working fob:
-
Prepare for 30-Minute Process: Be aware that this process will take around 30 minutes and requires patience. Ensure you have a power source connected to your vehicle if possible.
-
Insert New Key in Door Lock: Insert the new, unprogrammed key’s blade into the driver’s side door lock cylinder.
-
Turn Key to Unlock Five Times: Turn the key to the “unlock” position five times within 10 seconds.
-
Wait for DIC Message (First Wait): The Driver Information Center (DIC) will display “Remote Learn Pending, Please Wait.” Now, you must wait for ten minutes.
-
Press Ignition Button (First Time): After ten minutes, the DIC display will change to “Press Engine Start Button To Learn.” At this point, press the ignition button in your Chevy Cruze. The DIC will revert back to displaying “Remote Learn Pending, Please Wait.”
-
Repeat Wait and Ignition Press (Two More Times): Repeat step 5 two additional times. Each time, wait for ten minutes after the “Remote Learn Pending” message appears and then press the ignition button when the “Press Engine Start Button To Learn” message is displayed. This means you will wait for ten minutes, press ignition, wait ten minutes, press ignition, and wait ten minutes, press ignition.
-
Vehicle Enters Programming Mode: After the third repetition of step 6, all previously programmed key fobs (if any existed in the system’s memory) will be erased. The DIC should now display “Ready For Remote #1.” Your vehicle is now in programming mode and ready to learn new key fobs.
-
Place New Fob in Transmitter Pocket: Place the new key fob you wish to program into the transmitter pocket located in the center console, under the cupholder.
-
Press Ignition Button: Press the ignition button. Once the key fob is learned, the DIC will indicate it’s ready for the next remote.
-
Remove and Test: Remove the programmed key fob from the transmitter pocket and press the “unlock” button to test.
-
Program Additional Fobs (If Needed): To program additional key fobs, repeat steps 8 through 10.
-
Exit Programming Mode: Once you have programmed all necessary key fobs, press and hold the ignition button for 5 seconds to exit the programming mode.
Important Considerations:
- Maximum Key Fobs: Your 2015 Chevy Cruze can have a maximum of five key fobs programmed to it.
- Cut Key Blade: Ensure the physical key blade for each new fob is properly cut to match your vehicle’s locks and ignition before attempting programming.
- Battery Voltage: Especially during the 30-minute programming procedure, maintaining good battery voltage is crucial. Using a battery maintainer or jump leads can prevent interruptions.
- Professional Help: If you encounter difficulties or are uncomfortable with these procedures, it’s always best to consult a professional locksmith or your Chevy dealership for assistance.
By following these step-by-step instructions, you should be able to successfully program a new key fob for your 2015 Chevy Cruze with push-button start. This guide empowers you to take control of your car key needs and potentially save on expensive dealership programming costs.
