Is your 2016 Dodge Dart key fob not working? Before you panic, the most likely culprit is a dead battery. Replacing the battery in your Dodge Dart key fob is a simple and cost-effective fix that you can do yourself in just a few minutes. Typically, these key fobs use a CR2032 battery, which is widely available online and at most stores for under $6.
Here’s how to replace the battery in your 2016 Dodge Dart key fob:
Opening Your Dodge Dart Key Fob
The method to open your key fob depends on whether you have a newer or older style.
-
Newer Dodge Dart Key Fobs: Look for a hidden key within your fob. Remove this key and insert it into the designated slot on the fob casing. This will allow you to pry open the case.
-
Older Dodge Dart Key Fobs: If you don’t have a hidden key or a designated slot, you’ll need a thin, flat object like a small flathead screwdriver. Carefully locate the notch on the side of your key fob case. Gently insert the flathead screwdriver into the notch and twist to pry the case open. Be careful not to apply too much force to avoid damaging the plastic casing.
Replacing the Battery
Once you have successfully opened the key fob case, you’ll see the circuit board and the battery.
- Access the Battery: Carefully lift the circuit board to get to the battery underneath.
- Note Battery Orientation: Before removing the old battery, take a quick look at how it’s positioned in the case. Note the positive (+) and negative (-) sides. This will ensure you install the new battery correctly.
- Remove Old Battery: Gently take out the old CR2032 battery.
- Install New Battery: Insert the new CR2032 battery, making sure it’s in the same orientation as the old one.
- Close the Case: Carefully snap the key fob case back together until it’s securely closed.
Test Your Key Fob
After replacing the battery and closing the case, test your 2016 Dodge Dart key fob. Press the buttons to lock and unlock your car to ensure it’s functioning correctly. If it’s still not working, double-check the battery placement and ensure the battery contacts are clean and making good contact with the battery.
Video Instructions
For a visual, step-by-step guide, you can often find helpful video tutorials online. Search for “Dodge Dart key fob battery replacement” on platforms like YouTube. Our YouTube page may also have a video specifically for your Dodge Dart key fob, or a similar type of key fob to guide you through the process.
Understanding Key Fob Types
Key fobs come in various types. Here are five common types:
- Standard Remotes: Basic remotes with standard lock, unlock, and sometimes panic buttons.
- Flip Keys: These have a key blade that folds out from the remote, similar to a switchblade.
- Remote Heads: The key blade is permanently attached and sticks out from the remote.
- Fobik Keys: These fobs have a separate, hidden key inside, and the key and fob are not connected when the key is removed.
- Smart Keys: Often associated with push-to-start ignition systems and offer advanced features.
When Battery Replacement Isn’t Enough
If you’ve replaced the battery in your 2016 Dodge Dart key fob and it still isn’t working, the problem might be more than just a dead battery. In this case, you may need to consider a complete 2016 Dodge Dart Key Fob Replacement and potentially reprogramming.
Replacing your 2016 Dodge Dart key fob battery is usually a quick and easy fix to get you back on the road. By following these simple steps, you can likely solve your key fob issues and avoid unnecessary dealership costs.
