Losing or needing a spare key fob for your 2017 Ford Expedition doesn’t always mean an expensive trip to the dealership. If you already have two working programmed smart keys, you can easily program an additional key fob yourself right in your driveway. This guide provides you with clear, easy-to-follow instructions to program a new key fob for your 2017 Ford Expedition, saving you time and money.
Before you begin the programming procedure for your 2017 Ford Expedition key fob, ensure you meet these prerequisites:
- Two Existing Working Keys: You must have at least two previously programmed and functioning smart keys inside the vehicle. This is a crucial requirement for the onboard programming method to work. If you don’t have two working keys, you will need to visit an authorized Ford dealer or a qualified automotive locksmith for programming services.
- New Unprogrammed Key Fob: Have the new, unprogrammed smart key fob ready for programming.
- Vehicle Conditions: Make sure your 2017 Ford Expedition’s engine is turned off, and all doors are completely closed. It’s important that all doors remain closed throughout the entire programming process.
- Patience and Precision: Follow each step exactly as described and within the given time limits. Rushing or performing steps out of sequence may require you to wait and restart the procedure.
Now, let’s proceed with the programming steps for your 2017 Ford Expedition key fob:
-
Prepare the Center Console: Place the new, unprogrammed smart key fob into the designated pocket located inside your 2017 Ford Expedition’s center console. Ensure the button side of the key fob is facing outwards when placed in the pocket.
-
Unlock Command Sequence: Press the power door unlock button (either on the driver or passenger side door panel) three times in quick succession.
-
Brake Pedal Activation: Immediately after the unlock sequence, press and release the brake pedal one time.
-
Lock Command Sequence: Next, press the power door lock button (again, either driver or passenger side) three times in quick succession.
-
Brake Pedal Activation (Second Time): Press and release the brake pedal one more time, immediately after the lock sequence. At this point, observe the Start/Stop push button on your dashboard. The indicator light on the button should start to flash. This flashing light confirms that your 2017 Ford Expedition has successfully entered key programming mode and has recognized the presence of two already programmed smart keys.
-
Key Fob Programming Activation: Within one minute of the indicator light flashing, press the Start/Stop button one time. Keep an eye on your Expedition’s message center display in the instrument cluster. A message should appear, confirming that the new smart key has been successfully programmed to your vehicle. In the event that your 2017 Ford Expedition already has the maximum of four smart keys programmed, the message center will display “MAX # OF KEYS LEARNED,” and you won’t be able to program any more keys without deleting an existing one using professional diagnostic tools.
-
Exit Programming Mode: Remove the newly programmed smart key fob from the center console pocket. To exit the programming mode, press either the lock or unlock button on the newly programmed key fob.
-
Functionality Verification: Thoroughly test the newly programmed key fob. First, check the remote entry functions by pressing the lock and unlock buttons to ensure they operate correctly. Secondly, and most importantly, verify that you can start your 2017 Ford Expedition using the newly programmed key fob.
Important Reminders:
- Timing is Key: Ensure each step is performed within the specified timeframes, particularly the one-minute window in step 6. If you exceed the time limit or perform steps out of order, you may need to wait for at least one minute before restarting the entire procedure from the beginning.
- Maximum Keys: A 2017 Ford Expedition can have a maximum of 4 smart keys programmed. If you reach this limit, you will need professional assistance to replace or reprogram keys.
- Troubleshooting: If the programming procedure doesn’t seem to work, carefully re-read each step and ensure you’ve followed them precisely. If issues persist, it’s recommended to consult your Ford Expedition owner’s manual or seek assistance from a certified locksmith or Ford dealership.
By following these steps carefully, you can successfully program a new key fob for your 2017 Ford Expedition, providing you with a convenient spare and avoiding unnecessary dealership costs.
