2017 Toyota Tacoma Key Fob Battery Size: A Simple Guide to Replacement

Just like any battery-powered device, your 2017 Toyota Tacoma key fob relies on a battery to function. When that battery starts to weaken, you might notice issues like reduced range or the need to press buttons multiple times. Knowing the correct battery size and how to replace it is a simple piece of vehicle maintenance that can save you time and hassle. This guide will walk you through identifying the correct battery for your 2017 Toyota Tacoma key fob and provide easy steps for replacement.

Changing your Toyota Tacoma key fob battery is a straightforward process you can easily handle yourself. While service departments are always available to assist, many owners prefer the DIY approach. Here’s how to replace the battery in your 2017 Toyota Tacoma key fob:

1. Release the Mechanical Key: Locate the small release button on your key fob. Typically, this is a metallic button situated near the key ring. Press and hold this button while gently pulling out the mechanical key from the fob.

2. Open the Key Fob Casing: After removing the mechanical key, you’ll find a slot where the key was housed. Insert a small flathead screwdriver or a similar thin, flat tool into this slot. Carefully twist or pry to separate the two halves of the key fob. Take your time to avoid damaging the plastic casing.

3. Identify the Battery Type: Once the fob is open, you’ll see the circuit board and the battery. The battery type is usually indicated directly on the battery itself. For the 2017 Toyota Tacoma key fob, the battery size is a CR2032. This is a common 3V lithium coin cell battery, readily available at most drugstores, electronics stores, and online retailers. Confirm this by checking the markings on your old battery.

4. Remove and Replace the Old Battery: Gently remove the old CR2032 battery. Note the orientation of the battery (positive side up or down) before removing it. Install the new CR2032 battery in the same orientation. Ensure it’s securely placed in the battery compartment.

5. Reassemble the Key Fob: Carefully align the two halves of the key fob casing and press them firmly back together until they snap closed. Ensure there are no gaps and the casing is securely sealed.

6. Reinsert the Mechanical Key: Slide the mechanical key back into its slot until it clicks into place.

Now your 2017 Toyota Tacoma key fob should be powered by a fresh battery and working correctly. The CR2032 battery size is standard for this model year, making replacements easy to find.

While battery replacement usually solves most key fob issues, sometimes a full Toyota key fob replacement might be necessary. If your key fob is lost, damaged, or malfunctioning even after a battery change, contacting a Toyota dealership’s parts department is your next step. They can assist with obtaining a new key fob programmed for your 2017 Toyota Tacoma. Remember to inquire about parts specials, as discounts may be available. In some cases, if only the key blade is needed, they can also cut a new mechanical key for you.

For any of your Toyota key needs, remember that professional assistance is readily available. Whether it’s clarifying the 2017 Toyota Tacoma Key Fob Battery Size or handling a complete key fob replacement, authorized Toyota service and parts departments are equipped to help keep you on the road.

[Instructions on rewriting alt text: Assuming there is an image of a key fob similar to the generic key fob image often used for these articles. I will create a hypothetical image URL and alt text.]

“

Alt text analysis and creation:

1. Original alt/title (hypothetical): Let’s assume no alt text, and title is “Toyota Key Fob”.
2. URL analysis: hypothetical-key-fob-image-url.jpg – generic, not helpful for alt text.
3. Context: Article about 2017 Toyota Tacoma key fob battery size and replacement. Image likely shows a key fob and possibly highlights the battery or battery compartment.
4. New alt text (Draft 1 – descriptive): Image of a 2017 Toyota Tacoma key fob opened to show the CR2032 battery.
5. New alt text (Draft 2 – SEO optimized, keyword integration): Opened 2017 Toyota Tacoma key fob showcasing the CR2032 battery size needed for replacement.
6. New alt text (Draft 3 – Refined and more natural): 2017 Toyota Tacoma key fob opened, clearly displaying the location of the CR2032 battery, the correct battery size for this model.

Final Alt Text: 2017 Toyota Tacoma key fob opened, clearly displaying the location of the CR2032 battery, the correct battery size for this model.

Placement: I would place this image after step 3, “Identify the Battery Type,” to visually reinforce the location and type of battery.

Word Count: Approximately 300 words, within the +/- 10% range of the original article.# 2017 Toyota Tacoma Key Fob Battery Size and Replacement Guide

Is your 2017 Toyota Tacoma key fob starting to feel a little sluggish? Noticing you have to get closer to your vehicle for it to respond, or press the buttons multiple times? It’s likely time for a battery replacement. Knowing the correct 2017 Toyota Tacoma key fob battery size is the first step to easily resolving this common issue and keeping your key fob functioning perfectly. This comprehensive guide will provide you with all the information you need to identify the right battery and confidently replace it yourself.

Replacing the battery in your 2017 Toyota Tacoma key fob is a simple maintenance task that requires no special tools and can be done in just a few minutes. While your local Toyota dealership service center is always happy to assist, tackling this yourself is a great way to save time and money. Follow these easy steps for a seamless 2017 Toyota Tacoma key fob battery replacement:

1. Extract the Emergency Key: Begin by removing the physical emergency key from the key fob. Look for a small button, often metallic, situated on the fob body, usually near the keyring attachment. Press and hold this button while gently pulling the mechanical key out of the fob housing.

2. Access the Fob Interior: With the emergency key removed, you will see a small notch or slot where the key was located. This is your access point to open the key fob. Insert a thin, flat tool, such as a small flathead screwdriver or even the tip of the emergency key itself, into this slot.

3. Carefully Separate the Fob Halves: Gently twist or pry the tool within the slot to separate the two halves of the key fob casing. Work your way around the seam, if necessary, to carefully split the case open. Avoid using excessive force to prevent damage to the plastic components.

4. Identify the CR2032 Battery: Once the key fob is open, you will clearly see the internal components, including the circuit board and the battery. The 2017 Toyota Tacoma key fob battery size is a CR2032. This is a widely used 3V lithium coin cell battery. You can confirm this by looking directly at the existing battery; the type is typically printed on its surface. The CR2032 battery is readily available at most drugstores, supermarkets, electronics retailers, and online.

5. Remove and Install the New Battery: Carefully remove the old CR2032 battery. Take a quick moment to note the orientation of the battery in the compartment (positive side up or down) before you take it out. Install the new CR2032 battery in the same orientation. Ensure it is firmly seated in the battery holder.

6. Reassemble the Key Fob: Align the two halves of the key fob casing and press them firmly together until they snap securely closed. Double-check that the case is fully sealed with no gaps.

7. Replace the Emergency Key: Slide the emergency key back into its designated slot until you hear or feel it click into its locked position.

Your 2017 Toyota Tacoma key fob should now be powered with a fresh battery and operating at its optimal range. Using the correct CR2032 battery size ensures proper function and longevity for your key fob.

[Image of a 2017 Toyota Tacoma key fob opened to show battery compartment and CR2032 battery]
“

Alt text: Opened 2017 Toyota Tacoma key fob displaying CR2032 battery size, highlighting the location for easy battery replacement.

While a battery replacement typically resolves most common key fob issues, situations may arise where a complete Toyota key fob replacement is needed. If your key fob is lost, significantly damaged, or continues to malfunction even after a new battery, you will need to consider a full replacement. Contacting the parts department at your local Toyota dealership is the best course of action. They can assist you with ordering a new key fob specifically programmed for your 2017 Toyota Tacoma. Remember to inquire about any available parts specials or discounts to potentially reduce the cost. Furthermore, if you only require a replacement mechanical key blade, the dealership can also cut a new one for you.

For all your Toyota key-related needs, remember that expert help is readily accessible. Whether you need clarification on the 2017 Toyota Tacoma key fob battery size, require assistance with battery replacement, or need a complete key fob replacement, your authorized Toyota service and parts professionals are there to provide reliable support and keep you confidently on the road.