Battery for 2016 Jeep Cherokee Key Fob: Everything You Need to Know

Is your 2016 Jeep Cherokee key fob suddenly not working? Before you rush to the dealership and spend a fortune on a replacement, the solution might be as simple as changing the battery. Understanding the battery for your 2016 Jeep Cherokee key fob and how to replace it can save you time, money, and frustration.

Identifying the Correct Battery for Your 2016 Jeep Cherokee Key Fob

The most common type of battery for a 2016 Jeep Cherokee key fob is a CR2032 3V lithium coin battery. This small, round battery is widely available and relatively inexpensive. However, to be absolutely certain, it’s always best to double-check your owner’s manual. Alternatively, you can open your key fob (instructions below) and visually inspect the battery currently inside. The battery type is usually printed directly on the battery itself.

Alt text: A close-up of a CR2032 3V lithium coin battery, commonly used in 2016 Jeep Cherokee key fobs, displayed against a white background to clearly show its size and markings.

Step-by-Step Guide to Replacing Your 2016 Jeep Cherokee Key Fob Battery

Replacing the battery in your 2016 Jeep Cherokee key fob is a straightforward process you can easily do at home. Here’s a general guide:

  1. Gather Your Tools: You’ll likely only need a small flathead screwdriver or a similar thin tool to open the key fob casing. Have your new CR2032 battery ready.
  2. Open the Key Fob: Examine your key fob for a small notch or seam. Using your flathead screwdriver, gently pry open the casing. Refer to your owner’s manual for specific instructions for your key fob model if needed.
  3. Remove the Old Battery: Once the key fob is open, you’ll see the battery. Note the orientation (positive side up or down). Carefully remove the old battery. You might be able to use your fingertip or the edge of the screwdriver to gently lift it out.
  4. Insert the New Battery: Place the new CR2032 battery into the compartment, ensuring it’s in the correct orientation as the old battery. You should feel it snap into place.
  5. Close the Key Fob: Carefully snap the two halves of the key fob casing back together until they are securely closed.

Where to Purchase Batteries for Your 2016 Jeep Cherokee Key Fob

CR2032 batteries are readily available at many locations:

  • Drugstores and Pharmacies: Places like CVS, Walgreens, and Rite Aid usually stock a variety of batteries, including CR2032.
  • Grocery Stores: Many grocery stores have battery sections, often near the checkout or in the electronics/household goods aisles.
  • Electronics Stores: Stores like Best Buy or electronics specialty stores will definitely carry CR2032 batteries.
  • Online Retailers: Amazon, and other online retailers offer a wide selection of CR2032 batteries, often at competitive prices and in bulk quantities.
  • Keyless Entry Remote Inc.: Of course, as experts in key fobs, we also carry replacement batteries for your convenience. You can find high-quality CR2032 batteries right here at KeylessEntryRemoteInc.com, along with replacement key fobs if you ever need a spare or replacement for your 2016 Jeep Cherokee.

By understanding the battery for your 2016 Jeep Cherokee key fob and knowing how easy it is to replace, you can avoid unnecessary trips to the dealer and keep your key fob working reliably for years to come. Don’t let a dead battery leave you stranded – be prepared and keep a spare CR2032 battery on hand!

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *