Is your GMC key fob acting up, or worse, completely dead? Before you rush to the dealership, you should know that in many cases, the fix is as simple as changing the battery. The most common culprit behind a malfunctioning GMC key fob is a dead battery. Thankfully, replacing it is a straightforward process that you can easily do yourself at home. This guide from the experts at keyfobprog.com will walk you through each step of changing the battery in your GMC key fob, saving you time and money.
What You’ll Need to Change Your GMC Key Fob Battery
Before you begin, gather these simple tools:
- A flathead screwdriver: A small, flathead screwdriver is all you need to gently open the key fob casing.
- A CR2032 battery: GMC key fobs typically use a 3-volt CR2032 battery. You can find these widely available at most drugstores, hardware stores, and online retailers. Consider purchasing a multi-pack to have spares on hand.
Step-by-Step Guide to Replacing Your GMC Key Fob Battery
Follow these easy steps to replace the battery in your GMC key fob and get it working like new again:
-
Open the Key Fob Casing: Locate the small slot on the side or bottom of your GMC key fob. This slot is designed for opening the casing. Carefully insert the tip of your flathead screwdriver into this slot. Gently twist or pry until the key fob case begins to separate. Avoid using excessive force to prevent damaging the plastic casing. The case should pop open relatively easily.
-
Remove the Old Battery: Once the key fob is open, you’ll see the battery compartment. Take note of how the old battery is positioned, specifically which side is facing up (+ positive or – negative). This is important for inserting the new battery correctly. The battery is usually held in place by small clips. You can typically use your fingertip or the flathead screwdriver to gently nudge the old battery out of its compartment.
-
Insert the New Battery: Take your new CR2032 battery and insert it into the battery compartment, matching the orientation of the old battery you just removed. Make sure the positive (+) side is facing the correct direction, as you noted in the previous step. Press down gently until the battery is securely in place and the clips are holding it.
-
Close the Key Fob: Carefully align the two halves of the key fob casing. Press them firmly together until they snap securely back into place. You should hear a click indicating that the case is properly closed. Ensure there are no gaps between the two halves of the casing.
What If Your GMC Key Fob Still Doesn’t Work?
In most cases, replacing the battery will solve the problem and restore your GMC key fob to full working order. However, if you’ve replaced the battery and your key fob is still not functioning, there might be a more complex issue. This could involve a problem with the key fob itself or your vehicle’s electronic system.
If you suspect a more serious issue, don’t hesitate to contact our dealership to schedule an appointment with our certified technicians. We can diagnose the problem and provide the necessary repairs to get your key fob and vehicle working perfectly again.
Conclusion
Changing the battery in your GMC key fob is a quick and easy fix for a common problem. By following these simple steps, you can often avoid a trip to the dealership and get your key fob working again in minutes. Keep a spare CR2032 battery on hand, and you’ll be prepared for the next time your GMC key fob battery needs replacing.
