Is your Ford Edge 2020 key fob not working as reliably as it used to? You might be experiencing the common issue of a low or dead battery. Fortunately, replacing the battery in your Ford Edge 2020 key fob is a straightforward process you can easily do yourself at home, saving you time and a trip to the dealership. This guide will walk you through the simple steps to get your key fob working like new again.
Step-by-Step Guide to Replacing Your 2020 Ford Edge Key Fob Battery
Whether you have the standard integrated keyhead transmitter (IKT) or the intelligent access (IA) key, the battery replacement procedure is very similar. You’ll only need a small, flat tool like a coin or a flat-head screwdriver.
Here’s how to replace the battery in your Ford Edge 2020 key fob:
-
Prepare Your Key Fob and Tool: Locate the small slot on your Ford Edge 2020 key fob. This slot is typically found at the end of the key fob, near the key ring attachment. Gather a thin coin (like a penny or nickel) or a small flat-blade screwdriver.
-
Open the Key Fob Casing: Insert the edge of your coin or screwdriver into the slot on the key fob. Gently twist the coin or screwdriver. This action will separate the two halves of the key fob casing, allowing you to access the battery compartment. You may hear a click as the case begins to open.
-
Remove the Battery Cover: Once you’ve twisted and slightly opened the casing, you should be able to easily detach the battery cover. In some models, this cover might come off completely, while in others, it might be hinged. Carefully remove the cover to expose the old battery.
-
Take Out the Old Battery: With the battery compartment now accessible, you’ll see the old battery. Note the orientation of the battery – specifically, which side is facing up (+ or -). This is important for installing the new battery correctly. Gently remove the old battery. You may be able to pry it out with your fingertip or the edge of your tool if it’s snug.
-
Insert the New Battery: Take your new CR2032 battery (this is the most common type for Ford key fobs, but always double-check your owner’s manual or the old battery if you are unsure). Install the new battery into the compartment, ensuring that the orientation matches the way the old battery was positioned. The positive (+) side of the battery usually faces upwards. Press down on the battery to make sure it is securely seated in the battery housing.
-
Reassemble the Key Fob: Carefully snap the battery cover back onto the key fob casing. Press the two halves of the key fob casing back together until they click securely into place. Ensure there are no gaps and the fob feels firmly closed.
-
Test Your Key Fob: Once reassembled, test your Ford Edge 2020 key fob to ensure it is working properly. Try locking and unlocking your doors remotely and starting your vehicle. If everything works as expected, you’ve successfully replaced your key fob battery!
Important Notes and Tips
- Grease on Terminals: You might notice some grease on the battery terminals or the circuit board. Do not wipe this grease off. It’s there to ensure good electrical contact and prevent corrosion.
- Battery Disposal: Dispose of the old battery responsibly according to your local regulations for battery disposal. Many stores that sell batteries also offer battery recycling programs.
- Battery Orientation: Double-checking the battery orientation before inserting the new one is crucial. Incorrect orientation can prevent the key fob from working.
- No Reprogramming Needed: Replacing the battery in your Ford Edge 2020 key fob will not cause it to lose its programming. You should not need to reprogram your key fob after a battery replacement. It should operate normally immediately after the new battery is installed.
- Backup Key (for Intelligent Access Keys): If you have an intelligent access key, you might need to remove the backup physical key first to access the slot for opening the battery compartment. Refer to your owner’s manual for specific instructions if you are unsure.
Replacing your Ford Edge 2020 Key Fob Battery is a simple maintenance task that can save you inconvenience and money. By following these easy steps, you can quickly restore your key fob’s functionality and get back on the road with confidence.
