Losing or needing a spare key fob for your Jeep Patriot can be a common hassle. The good news is, if you have two working key fobs, you can program a new one yourself, saving time and money. This guide, brought to you by the experts at keyfobprog.com, will walk you through the process of programming a new Jeep Patriot Key Fob, directly referencing the official 2016 Patriot owner’s manual for accuracy.
Step-by-Step Jeep Patriot Key Fob Programming
Before you begin, ensure you have two currently functioning key fobs for your Jeep Patriot. This DIY programming method requires two valid keys to initiate the new key programming sequence. If you only have one or no working key fobs, you will need to visit an authorized Jeep dealer or a qualified automotive locksmith for assistance.
Here’s how to program your Jeep Patriot key fob:
Step 1: Prepare the New Key
First, have your new Sentry Key transponder blank cut to match your Jeep Patriot’s ignition switch lock cylinder key code. This step is crucial for the mechanical function of the key within the ignition.
Step 2: Insert the First Valid Key
Insert your first valid, working key fob into the ignition switch. Turn the ignition switch to the ON/RUN position. Hold it in this position for a minimum of three seconds, but do not exceed 15 seconds. After this time, turn the ignition switch back to the LOCK position and remove the first key.
Step 3: Insert the Second Valid Key
Immediately, within 15 seconds of removing the first key, insert your second valid, working key fob into the ignition switch. Turn the ignition switch to the ON/RUN position again. After approximately 10 seconds, you will hear a chime sound. Simultaneously, the Vehicle Security Light on your dashboard will begin to flash. Once you observe these indicators, turn the ignition switch to the LOCK position and remove the second key.
Step 4: Program the New Key Fob
Now, insert the new, uncut Sentry Key into the ignition switch. Turn the ignition switch to the ON/RUN position within 60 seconds of completing the previous step. After about 10 seconds, you will hear a single chime. The Vehicle Security Light will stop flashing, and then illuminate again for three seconds before turning off. This sequence confirms that the new Jeep Patriot key fob has been successfully programmed.
During this process, the Remote Keyless Entry (RKE) transmitter within the new key fob is also automatically programmed. You can repeat this entire procedure to program up to a total of eight key fobs for your Jeep Patriot.
Conclusion
Programming a new Jeep Patriot key fob is straightforward when you have two existing, functional keys. By following these steps, you can quickly add a spare key without the need for professional assistance. However, remember that if you encounter any issues or do not have two valid keys, your local Jeep dealer or a certified locksmith specializing in automotive key programming will be able to provide the necessary services. This DIY method is a convenient way to manage your Jeep Patriot key fob needs, directly informed by your vehicle’s owner manual.
