Changing the battery in your 2018 Ford Edge key fob is a quick and easy process that can save you time and money. This guide will walk you through each step, from identifying the correct battery to successfully installing it and ensuring your key fob functions correctly. We’ll also cover common issues and troubleshooting tips.
Many Ford owners find themselves searching for information on how to replace the battery in their Ford Edge key fob. This is a common maintenance task that can be easily performed at home with a few simple tools. Learn how to change the battery for a Ford key fob and avoid a trip to the dealership. This guide provides a step-by-step process for replacing the battery in your 2018 Ford Edge key fob. We’ll also discuss what battery do Ford key fob use and other helpful tips.
Identifying the Right Battery for Your 2018 Ford Edge Key Fob
Before you begin, it’s crucial to have the correct battery. The 2018 Ford Edge key fob uses a CR2032 battery, a common type readily available at most stores. Using the wrong battery can damage your key fob. Make sure you have a fresh CR2032 battery before starting the process. You can also learn more about taking apart your Ford key fob by visiting taking ford key fob 2018 f150 apart.
How to Locate the Battery Compartment
The battery compartment is located on the back of your key fob. You’ll see a small slot designed for a flathead screwdriver or similar tool. This slot is where you’ll begin the process of opening the key fob.
Step-by-Step Guide to Change Battery in 2018 Ford Edge Key Fob
Here’s a step-by-step guide to changing the battery in your 2018 Ford Edge Key fob:
- Insert the flathead screwdriver: Gently insert the flathead screwdriver into the slot on the back of the key fob.
- Twist and separate: Carefully twist the screwdriver to separate the two halves of the key fob. Avoid using excessive force, which could damage the plastic.
- Locate the battery: Once open, you’ll see the CR2032 battery. Note its position and orientation.
- Remove the old battery: Carefully pry the old battery out using your screwdriver or fingernail.
- Insert the new battery: Insert the new CR2032 battery, ensuring it’s positioned correctly, matching the orientation of the old battery.
- Reassemble the key fob: Align the two halves of the key fob and press them together until they snap shut.
- Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly.
Troubleshooting Tips
If your key fob still isn’t working after replacing the battery, try these troubleshooting tips:
- Check the battery orientation: Make sure the new battery is installed with the positive (+) side facing up.
- Clean the battery contacts: Use a cotton swab and rubbing alcohol to clean the battery contacts inside the key fob.
- Try reprogramming the key fob: Refer to your owner’s manual for instructions on how to reprogram your key fob. Learn more about how to replace your Ford Edge key fob battery by visiting how to replace battery in ford edge key fob.
Conclusion
Changing the battery in your 2018 Ford Edge key fob is a simple process that can be done at home with minimal tools. By following this guide, you can save yourself a trip to the dealership and keep your key fob functioning properly. For further assistance, check out our guide on how to change battery for ford key fob. Remember to always use the correct CR2032 battery for optimal performance.
FAQ
Q: How often should I change the battery in my 2018 Ford Edge key fob?
A: Typically, a key fob battery lasts 2-3 years.
Q: What type of battery does a 2018 Ford Edge key fob use?
A: A CR2032 battery.
Q: What if my key fob still doesn’t work after replacing the battery?
A: Check the battery orientation, clean the contacts, or try reprogramming the key fob.
Q: Can I use any type of CR2032 battery?
A: Yes, any brand of CR2032 battery should work.
Q: Where can I buy a CR2032 battery?
A: Most convenience stores, pharmacies, and online retailers sell CR2032 batteries.
Q: Do I need any special tools to change the battery?
A: A small flathead screwdriver is recommended.
Q: Can I damage my key fob if I change the battery myself?
A: As long as you’re careful and follow the instructions, you shouldn’t damage your key fob.
You might also be interested in our article about the 2018 ford taurus leather key fob.
Need help? Contact us via Whatsapp: +1 (641) 206-8880 Or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team.
Leave a Reply