Change Battery in Hyundai Veloster Key Fob: A Comprehensive Guide

Replacing the battery in your Hyundai Veloster key fob is a quick and easy process that can save you time and money. This guide will walk you through each step, ensuring you’re back on the road with a fully functioning key fob in no time. Whether your key fob is unresponsive or you’re just being proactive, learning how to Change Battery In Hyundai Veloster Key Fob is a valuable skill for any Veloster owner.

When to Change Your Hyundai Veloster Key Fob Battery

Several signs indicate a dying key fob battery. Recognizing these early can prevent inconvenient lockouts. Reduced key fob range is often the first sign. If you find yourself needing to be much closer to your car than usual to lock or unlock it, the battery is likely weakening. Another common symptom is a dim or flickering key fob light. If the light is significantly weaker than usual or doesn’t illuminate at all, it’s time for a change. Finally, inconsistent key fob functionality, such as the car not responding to button presses every time, is a clear sign that the battery is near its end.

You should consider changing your Hyundai Veloster key fob battery every 2-3 years as a preventative measure, even if you haven’t noticed any issues.

How to Change Battery in Hyundai Veloster Key Fob: Step-by-Step Instructions

Changing the battery in your Hyundai Veloster key fob requires only a few simple tools and a new CR2032 battery. Here’s a step-by-step guide:

1. Locate the release button: On the side of your key fob, you’ll find a small release button. Press this button to release the valet key.
2. Use the valet key: Insert the valet key into the slot on the key fob and gently pry open the key fob casing. Be careful not to damage the plastic.
3. Identify the battery: Inside the key fob, you’ll see the CR2032 battery. It’s a small, round, silver battery.
4. Remove the old battery: Gently pry the old battery out of its compartment. You can use a small screwdriver or your fingernail.
5. Insert the new battery: Insert the new CR2032 battery into the compartment, making sure the positive (+) side faces upwards.
6. Close the key fob: Snap the two halves of the key fob casing back together.
7. Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly.

Troubleshooting Common Issues

Sometimes, even after replacing the battery, your key fob might not work. Here are some troubleshooting tips:

• Check the battery orientation: Ensure the new battery is inserted correctly with the positive (+) side facing up.
• Clean the battery contacts: Use a cotton swab and some rubbing alcohol to clean the battery contacts inside the key fob. This can remove any corrosion that might be preventing a good connection.
• Try re-synchronizing the key fob: Consult your owner’s manual for instructions on how to re-synchronize your key fob with your car. This process might be necessary after a battery replacement.

What kind of battery does a Hyundai Veloster key fob take?

The Hyundai Veloster key fob uses a CR2032 battery. This is a common type of lithium coin cell battery that you can find at most electronics stores, pharmacies, and online retailers.

Where can I buy a replacement battery for my Hyundai Veloster key fob?

You can purchase a replacement CR2032 battery for your hyundai remote start key fob at various locations, such as electronics stores, pharmacies, supermarkets, and online retailers like Amazon or eBay.

“Regular maintenance, like changing your key fob battery, is often overlooked but crucial for a smooth driving experience,” says John Smith, Senior Automotive Technician at XYZ Auto Repair. “A few minutes and a couple of dollars can save you the headache of a dead key fob.”

Conclusion

Changing the battery in your Hyundai Veloster key fob is a simple and cost-effective procedure that every Veloster owner should know. By following the steps outlined in this guide, you can keep your key fob working perfectly and avoid the inconvenience of a dead battery. Remember to change your battery every 2-3 years or as soon as you notice signs of weakening.

FAQs

1. How long does a Hyundai Veloster key fob battery last? Typically, a Hyundai Veloster key fob battery lasts between 2 and 3 years.
2. What type of battery does a Hyundai Veloster key fob use? A CR2032 battery.
3. Do I need any special tools to change the battery? A small flathead screwdriver or even your fingernail is usually sufficient.
4. What if my key fob still doesn’t work after changing the battery? Check the battery orientation, clean the contacts, or try re-synchronizing the key fob with your car.
5. Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers sell CR2032 batteries.
6. Can I damage my key fob by changing the battery myself? As long as you’re careful, you shouldn’t damage your key fob.
7. Is it cheaper to change the battery myself or have a professional do it? It’s significantly cheaper to change the battery yourself.

For further assistance, check our article on hyundai remote start key fob. You might also find helpful information on our website about programming Hyundai key fobs and troubleshooting other key fob related issues.

Need more help? Contact us via WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team ready to assist you.