Change Battery on 2019 Chevy Silverado Key Fob: A Comprehensive Guide

Changing the battery in your 2019 Chevy Silverado key fob is a quick and easy process that can save you time and money. This guide will walk you through the steps involved, troubleshooting common issues, and provide expert advice to ensure you’re back on the road in no time. We’ll cover everything from identifying the right battery to properly disposing of the old one.

Locating the Release Button and Battery Type for Your 2019 Chevy Silverado Key Fob

Before you begin, locate the small release button on the side of your key fob. This button will allow you to separate the key fob casing to access the battery. For the 2019 Chevy Silverado, you’ll need a CR2032 battery. These are readily available at most stores that sell batteries. You can also find chevy silverado 1500 key fob battery online or even at your local Chevy dealership. If you’re considering getting a key fob from chevy dealership, it’s good to understand this process as well.

Changing 2019 Chevy Silverado Key Fob Battery

What Tools Do I Need to Change the Key Fob Battery?

You’ll only need a few simple tools: a small flathead screwdriver or a similar tool to pry open the key fob, and of course, a new CR2032 battery. Some key fobs have a small notch specifically designed for this purpose.

Step-by-Step Guide to Changing the Battery

1. Locate the release button: As mentioned earlier, find the small release button on your key fob.
2. Insert the flathead screwdriver: Carefully insert the flathead screwdriver into the slot next to the release button and gently pry open the key fob casing.
3. Separate the casing: Once the casing is slightly open, you can use your fingers to carefully separate the two halves.
4. Remove the old battery: Identify the old CR2032 battery and gently pry it out using your screwdriver or fingernail.
5. Insert the new battery: Place the new CR2032 battery into the compartment, making sure the positive (+) side is facing up.
6. Close the casing: Align the two halves of the key fob and press them together until they snap shut.
7. Test the key fob: Try locking and unlocking your vehicle to ensure the new battery is working correctly.

Installing New CR2032 Battery in Keyfob

Troubleshooting Common Key Fob Issues

Sometimes, even after replacing the battery, your key fob might not work. Here are a few common issues and solutions:

• Key fob still not working: Double-check that the new battery is properly installed and that the positive (+) side is facing up. If it still doesn’t work, you may need to reprogram your key fob.
• Key fob works intermittently: This could indicate a loose connection or a faulty key fob. Try cleaning the battery contacts with a cotton swab and alcohol. If the problem persists, you might need a replacement key fob for 2019 chevy equinox.

“A common mistake people make is not inserting the battery correctly,” says John Smith, Senior Automotive Technician at KEYFOBPROG. “Always ensure the positive side is facing up. This simple check can save you a lot of frustration.”

2019 Chevy Silverado Key Fob Working

How Often Should I Change My Key Fob Battery?

Typically, a key fob battery lasts between 3 to 5 years, but it’s always a good idea to replace it proactively if you notice any signs of reduced range or responsiveness. This information is also relevant for a key fob battery replacement chevy equinox 2019.

“Don’t wait until your key fob completely dies,” advises Maria Garcia, Lead Electrical Engineer at KEYFOBPROG. “Replacing the battery every few years can prevent unexpected lockouts and ensure your key fob always functions reliably.”

In conclusion, changing the battery on your 2019 Chevy Silverado key fob is a straightforward process that anyone can handle with a few simple tools. By following this guide and taking note of the expert advice provided, you can keep your key fob in optimal condition and avoid any unexpected inconveniences.

FAQ

1. What type of battery does a 2019 Chevy Silverado key fob use?
   A CR2032 battery.

2. How long does a key fob battery typically last?
   Between 3 to 5 years.

3. What tools do I need to change the battery?
   A small flathead screwdriver and a new CR2032 battery.

4. What if my key fob still doesn’t work after changing the battery?
   Double-check the battery installation and try cleaning the contacts. If it still doesn’t work, consider reprogramming or replacing the key fob.

5. Where can I buy a replacement CR2032 battery?
   Most stores that sell batteries, online retailers, and Chevy dealerships.

6. How do I know if my key fob battery is low?
   Reduced range or intermittent functionality.

7. Is it difficult to change the battery myself?
   No, it’s a simple process that anyone can do.

Need help with your Chevy Silverado key fob? Check out our other helpful articles on our website. Have other questions or need more specific assistance? Contact us via WhatsApp: +1 (641) 206-8880 Or visit us at: 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team ready to assist you.