Changing Battery in Subaru Crosstrek Key Fob

Changing the battery in your Subaru Crosstrek key fob is a quick and easy process that can save you the hassle of a dead key fob. This guide will walk you through the steps involved, helping you get back on the road in no time.

Identifying Your Subaru Crosstrek Key Fob

Before you begin Changing Battery In Subaru Crosstrek Key Fob, it’s important to identify the type of key fob you have. While the process is generally similar across different Subaru models, slight variations may exist. Knowing your specific model year can help you locate precise instructions. For example, if you’re looking for information about [how to change the battery on a subaru key fob], or are curious about the [subaru crosstrek 2022 key fob battery], exploring model-specific guides can be beneficial. Knowing your model year also allows you to quickly determine the correct battery type, such as the one needed for a [key fob battery change subaru crosstrek].

Gathering Your Tools

You’ll need just a few simple tools: a small flathead screwdriver or a similar tool for prying and a fresh CR2032 battery. These batteries are readily available at most electronics stores, pharmacies, and online.

Step-by-Step Guide to Changing the Battery

  1. Locate the release button: On the side of your Subaru Crosstrek key fob, you’ll find a small release button. This button is usually located near the key ring.
  2. Release the key: Press the release button and gently slide the metal emergency key out of the key fob.
  3. Open the key fob: Use the tip of your flathead screwdriver to carefully pry open the key fob casing. Start at the seam where the two halves of the fob meet. Be gentle to avoid damaging the plastic.
  4. Remove the old battery: Once the fob is open, you’ll see the old CR2032 battery. Carefully pry it out using your flathead screwdriver.
  5. Install the new battery: Insert the new CR2032 battery, making sure the positive (+) side is facing up, just like the old one.
  6. Close the key fob: Align the two halves of the key fob and press them together until they snap shut.
  7. Reinsert the key: Slide the metal emergency key back into its slot.

Troubleshooting Common Issues

Sometimes, even after replacing the battery, your key fob might not work. This could be due to a few reasons:

  • Incorrect battery installation: Double-check that the new battery is installed correctly with the positive (+) side facing up.
  • Damaged key fob: If the key fob was damaged during the battery replacement process, it might need to be replaced.
  • Programming issues: In rare cases, the key fob may need to be reprogrammed.

If you’ve checked these things and your key fob still isn’t working, consider visiting your local Subaru dealership or an automotive locksmith for assistance. You can find resources for issues like [where is battery in 2014 subaru forester key fob] or learn [how to change battery in 2019 subaru crosstrek key fob] on our website.

Conclusion

Changing the battery in your Subaru Crosstrek key fob is a simple DIY task that can save you time and money. By following these steps, you can ensure your key fob is always working properly. Regularly changing your key fob battery will prevent unexpected lockouts and keep you on the go.

FAQs

  1. How often should I change my Subaru Crosstrek key fob battery? Every 2-3 years, or sooner if you notice the key fob’s range decreasing.
  2. What type of battery does the Subaru Crosstrek key fob use? A CR2032 battery.
  3. Can I damage my key fob by changing the battery myself? While unlikely, it is possible to damage the key fob if you are not careful. Be gentle when prying open the casing.
  4. What should I do if my key fob still doesn’t work after changing the battery? Double-check the battery installation, inspect the key fob for damage, and consider reprogramming. If the issue persists, consult a professional.
  5. Where can I find more information about Subaru key fobs? You can explore our website for more detailed guides, such as [key fob battery change subaru crosstrek] or [how to change battery in 2019 subaru crosstrek key fob].

Need additional help? Contact us via WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team ready to assist you.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *