Lost your Ford Taurus key fob or need to program a new one? Don’t worry, programming your key fob can often be done yourself, saving you time and money at the dealership. This comprehensive guide provides step-by-step instructions for Ford Taurus Key Fob Programming, ensuring you get back on the road quickly.
Understanding Key Fob Programming for Your Ford Taurus
Key fob programming is necessary when you replace a lost or damaged remote, or when you add a new key fob to your Ford Taurus. The process involves syncing your key fob with your vehicle’s security system, allowing you to remotely lock, unlock, and sometimes even start your car. It’s important to note that Ford vehicles may have different programming procedures depending on the model year and features. While your owner’s manual is the best resource, we’ve compiled two common procedures to help you program your ford taurus key fob. Before you begin, ensure you have all your key fobs you wish to program, as the process may erase previously programmed remotes.
Programming Procedure A
This procedure is commonly effective for many Ford Taurus models. Make sure to perform these steps relatively quickly and avoid pressing the brake pedal at any point during the process.
-
Prepare Your Vehicle: Close all doors of your Ford Taurus. Open only the driver’s side door and press the “Unlock” button located on the driver’s side door panel while the door remains open. Insert your key into the ignition.
-
Enter Programming Mode: Turn the ignition key from the “OFF” position to the “RUN” position eight times in rapid succession within 8 seconds. Crucially, finish with the ignition in the “RUN” position. You should hear the door locks cycle (lock then unlock) to confirm that your Ford Taurus has entered programming mode. If the door locks do not cycle, you’ll need to remove the key and repeat from step 1, ensuring you perform the ignition turns quickly and correctly. “OFF” is the position where you can remove your key, and “RUN” is the position just before starting the engine.
-
Program the First Key Fob: Within 10 seconds of the door locks cycling, press any button on the first ford taurus key fob you want to program. The door locks should cycle again to confirm that this key fob has been successfully programmed.
-
Program Additional Key Fobs (If Applicable): If you have more than one key fob to program, within 10 seconds of the last confirmation cycle, press any button on the next key fob. Again, the door locks will cycle to confirm programming. Repeat this step for all remaining key fobs you need to program.
-
Exit Programming Mode: Turn the ignition key to the “OFF” position. The door locks should cycle one final time, indicating that your Ford Taurus has exited the key fob programming mode.
Troubleshooting Tip for Procedure A: If this procedure doesn’t work initially, try repeating it with all vehicle doors closed from the beginning.
Programming Procedure B
If Procedure A doesn’t work for your Ford Taurus, try Procedure B.
-
Vehicle Setup: Fasten your seatbelt and ensure all doors of your Ford Taurus are completely closed.
-
Initiate Programming Sequence: Turn the ignition key from the “OFF” position to the “RUN” position four times within a quick 3-second timeframe.
-
Confirmation Chime: Turn the ignition to the “OFF” position. Your Ford Taurus system should chime to confirm that it has entered key fob programming mode.
-
Program Key Fobs: Within 10 seconds of hearing the chime, press and hold any button on the first ford taurus key fob. The system should chime once to confirm successful programming of this remote.
-
Program Additional Remotes: Within 10 seconds, press and hold any button on the second key fob. The system will chime again to confirm programming. Repeat for any additional key fobs.
-
Exit Programming: Turn the ignition key to the “RUN” position to exit the programming mode.
Remember, for both procedures, speed and accuracy are important. If you don’t get the initial chime or door lock cycle, it means your vehicle hasn’t entered programming mode, and you’ll need to start over.
Here’s an example of a standard key fob and a smart proximity key. Note that smart proximity keys, often found in Ford Taurus models with push-button start, require a different programming method.
For Smart Proximity Keys
If your Ford Taurus uses a smart proximity key, especially if it has a push-button start ignition, these standard procedures will not work. Smart key programming is often more complex and may require diagnostic tools. For instructions specific to smart proximity key programming, please refer to our detailed guide on KEY PROGRAMMING for smart proximity keys.
By following these procedures, you should be able to program your ford taurus key fob successfully. If you encounter issues, double-check each step, consult your Ford Taurus owner’s manual, or consider seeking assistance from a professional automotive locksmith or dealership.
