For Harley Davidson owners with models from 2014 onwards, the key fob PIN offers a crucial layer of security and convenience. Understanding how to manage and utilize this PIN is essential for every rider. This guide will walk you through the process of accessing, changing, and using your Harley Key Fob Pin to disable the security system, ensuring you’re always in control of your bike’s security.
Accessing or Viewing Your Current Harley Key Fob PIN
If you need to recall your current PIN, follow these simple steps while your key fob is present:
-
Ignition and Kill Switch Setup: Ensure your key fob is nearby. Turn the ignition key to the “ON” position. Crucially, leave the handlebar kill switch in the “OFF” position at this stage.
-
Kill Switch Cycling Sequence: This step requires a specific sequence using your kill switch. Quickly cycle the switch in the following order: “Run,” then “Off,” then “Run,” then “Off,” and finally “Run” again. This sequence initiates the PIN access process.
-
Engage Left Turn Signal: Immediately after the kill switch sequence, press the left turn signal button twice. You should now see “ENTER PIN” displayed on your motorcycle’s screen, indicating you are in the PIN entry mode.
-
Initiate PIN Display with Right Turn Signal: Press the right turn signal button one time. At this point, your current five-digit PIN will be displayed, with the first digit flashing, ready for review or modification.
Changing Your Harley Key Fob PIN: Step-by-Step
To personalize your security or update your PIN, follow these steps to change it:
-
Access PIN Display Mode: Begin by following steps 1-4 above to access the PIN display mode, where your current PIN is visible with the first digit flashing.
-
Modify the First Digit: Use the left turn signal button to cycle through the numbers 1 through 9. Continue pressing the left turn signal until you reach your desired number for the first digit of your new PIN.
-
Move to the Next Digit: Once you have selected the desired first digit, press the right turn signal button once. This action will move the flashing cursor to the second digit position, allowing you to modify it.
-
Modify Subsequent Digits: Repeat step 6 for the second, third, fourth, and fifth digits of your PIN. Use the left turn signal to select the number and the right turn signal to move to the next digit.
-
Save Your New PIN: After entering your desired five-digit new PIN, cycle the handlebar kill switch to the “OFF” position. This action saves your newly entered PIN and returns the display to the standard motorcycle information screen. Your Harley’s security system will now recognize your new PIN.
Using Your PIN to Disable the Security System
In situations where your key fob is not present, disabled, or malfunctioning, your PIN becomes your essential backup to disable the security system and ride your Harley. Here’s how to use it:
-
Ignition and Left Turn Signal Initiation: Turn your motorcycle’s ignition to the “IGN” (Ignition) position. Immediately after turning the ignition ON, press and release the left turn signal button one time. This action signals that you will be entering the PIN manually.
-
Enter Your PIN: You will now input your five-digit PIN using the turn signals, just as you did when changing the PIN. Use the left turn signal to cycle through the numbers 1-9 to select the correct digit, and the right turn signal to move to the next digit in the sequence. Repeat this process for all five digits of your PIN.
-
Final Confirmation and System Disarm: After you have correctly entered all five digits of your PIN, press the right turn signal button one final time. This confirms your PIN entry. The security system will disarm, allowing you to start your motorcycle.
-
Start Your Ride: Once the system is disarmed, cycle the kill switch to the “ON” (Run) position, and you are ready to start your engine and ride.
Important Considerations:
- Error Handling: Be cautious when entering your PIN. If you enter an incorrect PIN while attempting to disarm the system, the alarm will activate for 30 seconds after the last digit is entered.
- Security System Lockout: After a failed PIN entry attempt, the security lamp will flash every second for 10 minutes. During this lockout period, the system will not accept any further PIN entry attempts. Wait for the lockout period to expire before trying again.
- Older Models: Please note that the procedures outlined above are specifically for Harley Davidson models from 2014 and newer. For models older than 2014, the PIN access, change, and disarming procedures may differ. Consult your owner’s manual for the correct instructions for your specific model year.
- Professional Assistance: If you encounter difficulties or have any questions regarding your Harley Davidson’s security system or key fob PIN, do not hesitate to contact a certified Harley Davidson service department for expert assistance. They can provide tailored guidance and support to ensure your motorcycle’s security system is functioning correctly and that you understand how to use it effectively.
