The Honda Crv 2017 Key Fob is a vital component of your vehicle’s security system, allowing you to lock, unlock, and start your car remotely. Understanding its programming and potential issues can save you time and money. This comprehensive guide provides everything you need to know about your Honda CRV 2017 key fob, from programming to replacement options.
Understanding Your Honda CRV 2017 Key Fob
Your key fob operates by sending a coded signal to your vehicle’s receiver, which then authenticates and triggers the requested action. It utilizes radio frequency identification (RFID) technology, ensuring a secure connection between the fob and your CRV.
There are two primary types of key fobs for the 2017 CRV:
- Standard Key Fob: This basic model includes lock, unlock, panic button, and remote trunk release functions.
- Smart Key Fob (Proximity Key): This advanced version offers keyless entry and push-button start capabilities.
Honda CRV 2017 key fob types
Common Issues and Troubleshooting
While generally reliable, you may encounter occasional issues with your Honda CRV 2017 key fob. Here are some common problems and possible solutions:
-
Key Fob Not Working:
- Replace the battery. Key fob batteries typically last 3-5 years.
- Check the key fob battery contacts for corrosion and clean them if necessary.
- Reprogram the key fob to your vehicle (see programming instructions below).
-
Key Fob Intermittent Operation:
- This could indicate a weak battery or a problem with the vehicle’s receiver. Consider replacing the battery or consulting a qualified automotive locksmith.
-
Lost or Stolen Key Fob:
- Contact an authorized Honda dealer or a professional automotive locksmith to have a replacement key fob programmed to your vehicle. This is crucial to prevent unauthorized access.
Replacing the battery in a Honda CRV 2017 key fob
Programming a Honda CRV 2017 Key Fob
You can program a new key fob to your Honda CRV 2017 yourself under certain conditions. For instance, you might need to program a replacement fob yourself if you purchased a pre-owned CRV with only one working key.
Important: These instructions are for informational purposes only. Procedures may vary slightly depending on the specific trim level of your CRV. If you are uncomfortable performing these steps yourself, contact a professional automotive locksmith or authorized Honda dealer.
DIY Programming Instructions (Standard Key Fob Only):
- Gather your materials: You will need all working key fobs for your CRV.
- Enter the vehicle: Sit in the driver’s seat and close all doors.
- Insert and remove the key: Insert the working key into the ignition and remove it, repeating this action six times within ten seconds.
- Turn on the hazard lights: Turn the hazard lights on by pressing the hazard button.
- Insert the key and turn to “ON”: Insert the key into the ignition and turn it to the “ON” position. Do not start the engine.
- Press the “LOCK” button: Press and hold the “LOCK” button on the working key fob until the door locks cycle.
- Program additional fobs (if applicable): Within 5 seconds of the door locks cycling, press the “LOCK” button on any additional key fobs you wish to program.
- Turn off the hazard lights: Turn the hazard lights off to complete the programming sequence.
Programming a Smart Key Fob
Programming a smart key fob requires specialized equipment and expertise. It’s highly recommended to have this procedure performed by a qualified automotive locksmith or an authorized Honda dealer.
Programming a Honda CRV 2017 key fob
Replacing Your Honda CRV 2017 Key Fob
If your key fob is lost, damaged, or the battery is no longer holding a charge, you’ll need a replacement. You have two primary options:
1. Authorized Honda Dealer:
- Pros:
- Guaranteed compatibility and quality.
- Programming is typically included in the service.
- Cons:
- Generally the most expensive option.
- May require appointments and longer wait times.
2. Qualified Automotive Locksmith:
- Pros:
- Often more affordable than dealerships.
- Typically offer mobile service for added convenience.
- Cons:
- It’s essential to choose a reputable and experienced locksmith specializing in Honda vehicles.
Frequently Asked Questions about Honda CRV 2017 Key Fobs
Can I drive my Honda CRV 2017 with a dead key fob battery?
Yes, you can usually start your CRV 2017 with a dead key fob battery using the hidden key blade to unlock the door and by holding the key fob close to the start button. However, functionality will be limited.
How much does it cost to replace a Honda CRV 2017 key fob?
The cost of replacing a Honda CRV 2017 key fob can range from $50 to $400 or more depending on the type of key fob, your location, and where you choose to have it replaced (dealership, locksmith, etc.).
Can I program a used Honda CRV 2017 key fob to my car?
While it might seem possible, programming a used key fob is not recommended and can be extremely difficult. It’s best to obtain a new key fob to ensure proper functionality and security.
What should I do if I lose all my Honda CRV 2017 key fobs?
If you’ve lost all your key fobs, contact an authorized Honda dealer or a trusted automotive locksmith immediately. They can cut and program new keys to your CRV. Be prepared to provide proof of ownership.
How can I extend the life of my Honda CRV 2017 key fob battery?
Avoid frequently dropping your key fob, keep it away from extreme temperatures, and replace the battery as soon as you notice any signs of reduced range or responsiveness.
Conclusion
Your Honda CRV 2017 key fob is your gateway to a seamless driving experience. Understanding its features, programming procedures, and replacement options will equip you to handle any situation.
If you have any questions about your Honda CRV 2017 key fob, require a replacement, or need assistance with programming, don’t hesitate to contact the experts at Keyfobprog. We are dedicated to providing top-notch service and solutions for all your automotive key fob needs.
Call us at +1 (641) 206-8880 or visit our office at 1326 N Houston St, Amarillo, TX 79107, USA. We’re here to help!
Leave a Reply