How to Change Your 2019 Jeep Compass Key Fob Battery

Is your 2019 Jeep Compass key fob acting up? Before you jump to any conclusions about needing a replacement, it might just be a simple battery issue. This guide will walk you through the easy steps of how to change your 2019 Jeep Compass key fob battery, saving you time and potential headaches.

Why is My Jeep Compass Key Fob Not Working?

There are a few telltale signs that your Jeep Compass key fob battery is dying:

Decreased Range: You find yourself standing closer and closer to your vehicle to get it to lock or unlock.
Intermittent Functioning: The key fob works sometimes, but not others.
Dashboard Warning Light: Some Jeep Compass models display a warning light on the dashboard if the key fob battery is low.

If you’re experiencing any of these issues, it’s time to swap out that old battery for a new one.

What Kind of Battery Does a 2019 Jeep Compass Key Fob Take?

The 2019 Jeep Compass key fob requires a CR2032 battery, a common type of lithium coin battery found at most convenience stores, supermarkets, and electronics stores.

How To Change the Battery in a 2019 Jeep Compass Key Fob: A Step-by-Step Guide

Changing the battery in your 2019 Jeep Compass key fob is a simple process that you can do right at home. Here’s how:

Find the Key Release: Locate the small button on the back of your key fob.
Release the Emergency Key: Press the key release button and gently slide the metal emergency key out of the fob.
Open the Fob: Use the emergency key or a small flathead screwdriver to carefully pry open the key fob casing. Start at the notch where the emergency key was inserted.
Remove the Old Battery: Once the fob is open, you’ll see the CR2032 battery. Gently remove it. Avoid touching the battery contacts.
Insert the New Battery: Insert the new CR2032 battery, making sure the positive (+) side faces up, just like the old battery.
Reassemble the Fob: Align the two halves of the key fob and press them together until you hear a snap, indicating it’s securely closed.
Test the Key Fob: Make sure all the buttons (lock, unlock, panic) are functioning properly.

Replacing a Jeep Compass Key Fob Battery

Important Note: Avoid using excessive force when opening or closing the key fob, as this could damage it. If you are uncomfortable performing these steps yourself, any reputable locksmith or automotive service center can replace the battery for you.

Troubleshooting: What if My Key Fob Still Doesn’t Work?

If you’ve replaced the battery and your key fob still isn’t working, here are a few things to check:

Battery Orientation: Double-check that you’ve installed the new battery with the positive (+) side facing up.
Programming: In some cases, you may need to reprogram your key fob to your Jeep Compass after replacing the battery. Your owner’s manual should have instructions, or you can search online for model-specific guidance.
Other Issues: If you’re confident the battery is installed correctly and the key fob is programmed, there may be a different issue with the fob itself, the vehicle’s receiver, or another electrical component. In this case, it’s best to consult a qualified automotive locksmith or dealership for diagnosis and repair.

Keep Your Jeep Compass Key Fob in Top Shape

Changing your 2019 Jeep Compass key fob battery is a quick and easy way to prevent frustrating lockouts and keep your vehicle access running smoothly. By following the simple steps outlined above, you can tackle this task with confidence.

Need More Help? Contact us at KEYFOBPROG. Our team of automotive key fob experts is here to assist you with any questions, concerns, or programming needs.

Have other Jeep Compass key fob issues? Check out these helpful resources on our site:

Get in touch!

Whatsapp: +1 (641) 206-8880
1326 N Houston St, Amarillo, TX 79107, USA.

We’re here for you 24/7.