How to Change Battery in 2016 GMC Yukon Key Fob

Changing the battery in your 2016 GMC Yukon key fob is a quick and easy process that can save you time and money. Knowing how to perform this simple task yourself can prevent unexpected lockouts and keep your Yukon accessible when you need it most. This guide provides a step-by-step process to replace your key fob battery. how to replace a gmc key fob battery

Locating the Release Button and Opening the Key Fob

The first step in changing your 2016 GMC Yukon key fob battery is locating the small release button on the fob. This button is usually located on the side or back. Once you’ve found the release button, use a small flathead screwdriver or a similar tool to gently press it. While holding the button down, separate the two halves of the key fob.

Identifying and Removing the Old Battery

Inside the key fob, you’ll see the old battery. Take note of its position and type (CR2032 is common). Use your small flathead screwdriver or a plastic opening tool to carefully pry the old battery out of its compartment. Avoid using excessive force, as this could damage the fob. gmc key fob battery removal

What Type of Battery Does a 2016 GMC Yukon Key Fob Use?

The 2016 GMC Yukon key fob typically uses a CR2032 battery. This is a common type of lithium coin cell battery.

Installing the New Battery and Reassembling the Key Fob

Once the old battery is removed, insert the new CR2032 battery into the compartment, making sure it’s positioned correctly, positive side up. Then, align the two halves of the key fob and press them together until they snap shut. replace gmc key for fob

Testing the Key Fob

After reassembling the key fob, test all its functions (lock, unlock, remote start, panic button) to ensure the new battery is working properly. If any functions aren’t working, double-check the battery installation and try again.

Why is My GMC Yukon Key Fob Not Working After Battery Replacement?

Sometimes, the key fob may need to be re-synchronized with your vehicle after a battery change. Consult your owner’s manual for specific instructions.

John Smith, a certified automotive technician with over 20 years of experience, advises, “Always use a high-quality CR2032 battery for optimal key fob performance. Cheap batteries can leak and damage the fob’s internal components.” He also recommends, “If you’re unsure about any step of the process, consult your owner’s manual or contact a qualified technician.” 2016 gmc yukon key fob programming

Conclusion: Keep Your Yukon Accessible with a Fresh Key Fob Battery

Changing the battery in your 2016 GMC Yukon key fob is a simple task that anyone can perform with a few basic tools. By following these steps, you can avoid unexpected lockouts and keep your Yukon accessible when you need it. 2016 gmc yukon key fob battery

FAQ

1. How often should I change my key fob battery? Typically, every 2-3 years.
2. Where can I buy a CR2032 battery? Most hardware stores, electronics stores, and online retailers sell them.
3. What if my key fob still doesn’t work after changing the battery? Consult your owner’s manual or contact a qualified technician.
4. Can I damage my key fob by changing the battery myself? It’s unlikely, but avoid using excessive force.
5. Do I need to reprogram my key fob after changing the battery? Usually not, but consult your owner’s manual.
6. How can I tell if my key fob battery is low? You may notice decreased range or intermittent function.
7. Is there a special tool required to open the key fob? A small flathead screwdriver or plastic opening tool is usually sufficient.

Common Scenarios

• Key fob works intermittently: This often indicates a low battery.
• Key fob doesn’t work at all: Try changing the battery. If the problem persists, it may be a more serious issue.
• Key fob range is reduced: This can be a sign of a weak battery.

Further Assistance

For more helpful guides on Key Fob Programming and replacement, visit our articles on how to replace a GMC key fob battery, GMC key fob battery removal, and 2016 GMC Yukon Key Fob Programming.

Need professional assistance? Contact us via Whatsapp: +1 (641) 206-8880 or visit our location at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.