How to Change Battery in 2019 Ram Key Fob

Changing the battery in your 2019 Ram key fob is a quick and easy process that can save you time and money. This guide will walk you through each step, ensuring you’re back on the road with a functioning key fob in no time.

Identifying Your 2019 Ram Key Fob

Before starting, it’s important to verify you have the correct key fob. 2019 Ram trucks typically use a standard flip-key fob. Familiarize yourself with its components, such as the release button and the key blade itself. This will make the battery replacement process smoother.

2019 Ram Key Fob Battery Replacement Steps

Gathering Your Tools and Supplies

You’ll need a few items to change the battery in your 2019 Ram key fob: a small flat-head screwdriver or a similar tool for prying, and a new CR2032 battery. These are readily available at most stores, and having them prepared beforehand will streamline the process. Remember, using the correct battery type is crucial for proper key fob operation.

Where to Buy a CR2032 Battery

CR2032 batteries are common and can be found at most pharmacies, electronics stores, and even some grocery stores. You can also find them online. If you need to get key fob battery replaced, professional services are available as well.

Step-by-Step Guide to Changing the 2019 Ram Key Fob Battery

1. Release the Emergency Key Blade: Locate the small release button on your key fob and press it to release the metal key blade.
2. Open the Key Fob: Using the tip of your flat-head screwdriver, carefully pry open the key fob casing along the seam where the two halves meet. Be gentle to avoid damaging the plastic.
3. Locate and Remove the Old Battery: Inside the key fob, you’ll see the CR2032 battery. Gently pry it out using your screwdriver.
4. Install the New Battery: Insert the new CR2032 battery, ensuring the positive (+) side faces up, just like the old battery.
5. Close the Key Fob: Align the two halves of the key fob casing and press them firmly together until they snap shut.
6. Reinsert the Emergency Key Blade: Slide the emergency key blade back into its slot until it clicks into place.

Do you know how to change the battery in my key fob acura? The process is similar for many vehicles.

Testing Your Key Fob

After replacing the battery, test all the key fob functions, including locking, unlocking, and remote start, to ensure it’s working correctly. If you’re still having issues, there might be a different problem with your key fob, and you may need professional assistance.

“A common mistake is inserting the battery incorrectly,” says John Smith, Senior Automotive Technician at Key Fob Pro. “Always double-check the positive (+) side is facing up.”

Closed Ram Key Fob after Battery Change

Troubleshooting Common Issues

Sometimes, even after replacing the battery, your key fob might not work. This could be due to a few reasons, such as a faulty key fob, programming issues, or a problem with your vehicle’s receiver. If you have a replacement battery for mdx key fob and it’s not working, these issues can occur too.

“If you’ve changed the battery and your key fob still isn’t working, it’s best to consult a professional,” advises Maria Garcia, Key Fob Programming Specialist at Key Fob Pro. “They can diagnose the issue and provide the appropriate solution.” You might even need to change battery in 2019 acura rdx key fob if that’s the vehicle you have. It’s also important to understand how the 2019 tundra key fob battery functions.

Conclusion

Changing the battery in your 2019 Ram key fob is a simple task that most car owners can handle themselves. By following this guide, you can save yourself a trip to the dealership and keep your key fob functioning perfectly.

FAQ

1. What type of battery does the 2019 Ram key fob use? A CR2032 battery.
2. How often should I change the battery? Every 2-3 years, or when you notice reduced range.
3. What if my key fob still doesn’t work after a new battery? Consult a professional for diagnosis and repair.
4. Can I damage my key fob during the battery replacement process? Yes, if you use excessive force when prying open the casing.
5. Where can I get a replacement key fob? From your dealership or an authorized locksmith.
6. Can I program a new key fob myself? It depends on the vehicle. Some require professional programming.
7. What tools do I need to change the battery? A small flat-head screwdriver.

For assistance, contact us via Whatsapp: +1 (641) 206-8880 Or visit our location: 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team.