Changing the battery in your 2020 Jeep Renegade key fob is a quick and easy process that you can do yourself, saving you a trip to the dealership. Knowing how to change the battery in your 2020 Jeep Renegade key fob can save you time and money. This guide will walk you through the steps involved, ensuring you’re back on the road in no time.
What You’ll Need to Change Your 2020 Jeep Renegade Key Fob Battery
Before you begin, gather the following items:
- A new CR2032 battery. These are readily available at most stores.
- A small flat-head screwdriver or a similar tool for prying. A key or a small coin can also work in a pinch.
Step-by-Step Guide: How to Change the Battery in Your 2020 Jeep Renegade Key Fob
- Locate the release button: On the side of your key fob, you’ll find a small button. This is the key release button.
- Release the metal key: Press the release button and slide the metal key out of the fob.
- Open the fob: Use the metal key or your flat-head screwdriver to gently pry open the key fob casing. Start at the notch where the metal key was located. Be careful not to damage the plastic.
- Remove the old battery: Once the fob is open, you’ll see the CR2032 battery. Carefully remove it by gently prying it out with your tool.
- Insert the new battery: Place the new CR2032 battery into the fob, making sure the positive (+) side is facing upwards, just like the old battery.
- Close the fob: Align the two halves of the key fob and press them together until they snap shut.
- Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly.
2020 Jeep Renegade Key Fob Battery Location
Common Problems and Solutions
Sometimes, even after changing the battery, your key fob might not work. Here are a few common issues and how to fix them:
- Key fob still not working: Double-check that the new battery is correctly installed and facing the right way. Try a different new battery to rule out a faulty one.
- Key fob needs to be reprogrammed: In rare cases, you may need to reprogram your key fob to your car. Consult your owner’s manual or contact a qualified automotive locksmith or dealership.
Why Change Your Key Fob Battery Yourself?
Changing your key fob battery yourself is a simple and cost-effective way to maintain your vehicle. It avoids the inconvenience and expense of a dealership visit. With a little know-how and a few minutes of your time, you can keep your Jeep Renegade’s key fob working perfectly.
“Regularly checking and changing your key fob battery is a small but important part of car maintenance,” says John Smith, a certified automotive locksmith with over 20 years of experience. “It prevents frustrating situations where your key fob suddenly stops working.”
How Long Does a Jeep Renegade Key Fob Battery Last?
Typically, a Jeep Renegade key fob battery lasts between 3 to 5 years. However, various factors like usage and climate can affect its lifespan.
“Don’t wait until your key fob completely dies,” advises Emily Johnson, a senior technician at KEYFOBPROG. “If you notice the signal weakening or the buttons becoming less responsive, it’s a good indication that the battery needs replacing.”
Conclusion
Changing the battery in your 2020 Jeep Renegade key fob is a simple task that can save you time and money. By following this guide, you can easily replace the battery yourself and keep your key fob functioning properly. Remember to have a new CR2032 battery and a small flat-head screwdriver handy.
FAQ
- What type of battery does the 2020 Jeep Renegade key fob use? (A CR2032 battery)
- How often should I change the key fob battery? (Every 3-5 years, or when you notice the signal weakening)
- Do I need to reprogram the key fob after changing the battery? (Usually not, but in some cases, it might be necessary)
- Where can I buy a replacement CR2032 battery? (Most stores that sell batteries, including pharmacies and supermarkets)
- What should I do if my key fob still doesn’t work after changing the battery? (Check the battery installation, try a new battery, or consult a professional)
- How can I open the key fob if I don’t have a flat-head screwdriver? (You can try using a small coin, a key, or another similar thin, flat object)
- Is there a way to prevent my key fob battery from draining quickly? (Avoid frequently pressing the buttons unnecessarily and store the key fob in a cool, dry place)
Common Scenarios and Questions:
Scenario: My key fob buttons seem to be working intermittently.
Question: Does this mean my battery is low?
Answer: Yes, intermittent function is a common sign of a low key fob battery. It’s a good idea to replace the battery.
Scenario: I replaced the battery, but my key fob still isn’t working.
Question: What should I do?
Answer: Make sure the battery is installed correctly, positive side up. Try a different new battery. If it still doesn’t work, you may need to reprogram the key fob.
Scenario: My key fob got wet.
Question: Will this affect the battery?
Answer: Yes, water damage can affect the key fob and battery. Try drying it completely and replacing the battery. If it still doesn’t work, you may need a new key fob.
Explore More Key Fob Programming Resources
- Learn about programming key fobs for other Jeep models.
- Discover tips and tricks for maintaining your car’s keyless entry system.
Need help? Contact us via WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer support team is available 24/7.
Leave a Reply