How to Change Battery in Chevy Key Fob 2019

Changing the battery in your 2019 Chevy key fob is a quick and easy process that can save you time and money. If your key fob is starting to act up, like having reduced range or needing to be held closer to your car than usual, a dying battery is often the culprit. Knowing how to change the battery in your Chevy key fob 2019 model will help you avoid any unexpected lockouts.

Identifying Your 2019 Chevy Key Fob Type

Before you begin, it’s essential to identify the type of key fob you have. Different Chevy models in 2019 may have slightly different fob designs, which might influence the battery replacement procedure. Refer to your owner’s manual if you are unsure. Generally, 2019 Chevy key fobs feature either a hidden key release or a small slot designed specifically for battery replacement.

Gathering the Necessary Tools

You’ll need only a few simple tools. Most importantly, you’ll need a fresh CR2032 battery. This is the standard battery for most Chevy key fobs. You might also need a small flathead screwdriver or a similar tool to help pry open the key fob casing. Some key fobs can be opened using just your fingernails.

Step-by-Step Guide: Replacing the Battery in Your 2019 Chevy Key Fob

Here’s a step-by-step guide on how to change the battery in your 2019 Chevy key fob:

Locate the key release button or slot: This is usually found on the side of the fob.
Release the hidden key: Press the button or use the small screwdriver to release the metal key hidden within the fob.
Separate the key fob halves: Carefully use the key or a small flathead screwdriver to pry open the fob casing along the designated seam. Be gentle to avoid damaging the plastic.
Identify and remove the old battery: The CR2032 battery will be clearly visible. Note its orientation. Gently pry it out using your fingernail or the screwdriver.
Install the new battery: Place the new CR2032 battery in the compartment, ensuring it’s in the same orientation as the old battery. Press it firmly into place.
Reassemble the key fob: Carefully align the two halves of the fob and press them together until they snap shut.
Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly.

Need help with an older model? Check out how to change battery in 2008 chevy tahoe key fob.

Common Issues and Troubleshooting

Sometimes, you might encounter issues during the battery replacement process. For instance, the fob might not work even after installing a new battery. This could be due to improper battery installation or other underlying issues. If the problem persists, consider consulting a qualified automotive locksmith. You can find resources online on how to take battery out of chevy key fob for further assistance.

“A common mistake people make is not paying attention to the battery’s orientation,” says John Miller, a certified automotive locksmith with over 15 years of experience. “Make sure the positive (+) side is facing up, just like the old battery.”

Conclusion

Knowing how to change the battery in your Chevy key fob 2019 model is a simple yet valuable skill that can prevent inconvenient lockouts. By following the steps outlined in this guide, you can easily replace the battery yourself and save on unnecessary expenses. Remember to always use a fresh CR2032 battery and handle the key fob with care.

FAQ

What type of battery does a 2019 Chevy key fob use? A CR2032 battery.
How often should I change the key fob battery? Every 2-3 years, or when you notice reduced performance.
Can I damage the key fob by changing the battery myself? It’s possible if you’re not careful. Be gentle when prying open the casing.
What if my key fob still doesn’t work after changing the battery? Check the battery orientation or consult an automotive locksmith.
Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers carry them.
Is it expensive to have a professional change the key fob battery? It’s relatively inexpensive, but you can save money by doing it yourself.
Are there different types of 2019 Chevy key fobs? Yes, some models have slightly different designs.

Common Situations and Questions:

Key fob not working at all: Try replacing the battery. If the issue persists, there may be a problem with the key fob’s internal components.
Key fob working intermittently: This is a classic sign of a dying battery. Replace the battery promptly.
Key fob has reduced range: A weak battery is the likely cause. Replace the battery.

Further Assistance

For more information and support related to Key Fob Programming and other automotive locksmith services, explore our other helpful articles on KEYFOBPROG.

Need more help? Contact us via WhatsApp: +1 (641) 206-8880 or visit our shop at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.